Precision machining bathroom aluminum connector

An accessory for connecting a water supply and drainage pipe or a heating pipe. The connection mode of the pipe connecting piece is mainly connected by screw thread, flange connection, welding connection and socket connection. The materials used are cast iron, malleable cast iron, cast steel, forged steel, nonferrous metal and nonmetal material, etc.. Threaded connection is widely used, it mainly has the following 14 kinds of:

1 external joints: also known as the sleeve, the direct head. With internal thread, the general connection of the same nominal diameter of the two pipes, or with the outer thread of the pipe fittings and valves. Is the largest amount of a connecting piece. There is no external connector Harness Harness and two. Barrier outside the wire connector generally adopts a taper pipe threads, and can also adopt a cylindrical pipe thread; harness connector can only be using a cylindrical pipe thread.

2 different diameter outer joint: also known as reducer, reducer sleeve. Pipe with internal thread, but with different nominal diameter at both ends.

3 live joints: also known as the connecting nut, screw. Consisting of two joints and a sealing surface. The sealing surface is arranged between the two joints and is connected with the two joint, and the sealing surface is convenient to install and remove the joint when the sealing surface is maintained. Two joints are in contact with the plane between the pad has 2mm thick rubber or rubber asbestos gasket, in order to ensure the pipeline seal.

4 elbow: also called 90 degree bend, square, curved head. With internal thread, used to connect the two nominal diameter of the same pipe, and make the pipeline for 90 degrees turn.

5 different diameter elbow: also known as the size of the elbow, the size of the bend. For connecting two pipes with different nominal diameter or with external thread pipe fittings, valves, and make the pipeline for 90 degree turn, one end of the pipe diameter reduction.

6.45 degree bend: also known as straight, half bend. For connecting two pipes with the same nominal diameter or with external thread pipe fittings, valves, and make the pipeline for 45 degree turn.

7 outside of the month: also known as the outer fiber, the moon and the moon. Similar to the elbow. Its arc radius is larger. Mainly used for the need to bend a larger radius of the pipeline. Outside the moon is a thread, and the connection with the pipe must be used in conjunction with the external connector.

8: three days, also known as the three road bully bending, bending t. The pipe fittings and valves are used for connecting 3 pipes with the same nominal diameter and with external threads, wherein, the two pipes are in a straight line, and the other pipe is perpendicular to the two pipes. The need for a place where the road connecting pipe.

9 different diameter three links: the use of similar to the three pass. But three end nominal diameter is not completely the same or not the same, used to connecting one end of the pipe can be with the end of the straight vertical, can also be a 45 degree angle with the end of the straight pipe.

Four 10 links: also known as the cross connector, four days, four forks. For the connection between the road and the road on both sides of the branch manager. Four with the same diameter and diameter of two. Mainly used for conveying gas pipeline, so that the pipeline into a ten - shaped branch. The application range is smaller than three. ?

11 lock nut: also known as anti loose nut, six angle clips. The locking nut is provided with a cylindrical pipe thread. ?

12 six angle joints: also known as the six corners of the external screw thread, wire hoop, inner tube. The middle part of the middle part is provided with a convex hexagonal shape, and is used for tightening in the middle of the installation. Pipe fittings or valves with threaded connections at both ends. To reduce the volume, the general will be part of an inner joint nominal diameter greater than 65mm in the middle of the protruding octagonal made. ?

13 and nuts: also known as pipe lining, inside and outside screw and bushing. One end of it with a thread, the other end of the thread, the two thread of the nominal diameter is not the same. Generally used to reduce the pipe diameter, is a lack of suitable substitutes in reducing fittings case. One end of the inner screw thread is directly connected with the small diameter pipe; one end of the external screw thread is matched with the outer joint, and the pipe is connected with the large diameter pipe, or directly screwed into the pipe fitting with the inner screw thread. ?

14 plugging: also known as plug, plug, plug, tube bulkhead. Solid, one end with external thread. Used for blocking the pipeline, to prevent leakage of the pipeline intermediary, and can prevent the debris into the pipeline. Usually with the outer joint, three way and other fitting with the use of.

Our factory:  

Our workshop:  

Our processing equipment:    

Our Test Equipment:  

Our warehouse:

Ningbo Beilun Jiaoyi Factory is specialized in CNC machining parts and die casting fitting.

We can machine include those accessories: CNC machining Lock parts, CNC machining handle parts, door and windows hardware parts, home decoration precision machining parts, CNC machining plumbing parts, precision machining building decoration parts, hardware tools parts, CNC machining bathroom parts, kitchen hardware appliances, precision machining mechanical components, furniture hardware accessories etc.

Please feel free to contact with us.and welcome to visit us at any time.