cyclone seperator for powder recovery
1---External electric vibrators
2---Advanced steel mesh sieve -400 μ
Upon request
3--Short-stroke cylinder with reed contacts
Upon request
Mono cyclone for free-flowing, non-adhesive powder coating processing and recycling.
Its professional applications in multi-color powder coating operation processing.
As the cyclone easy to clean, it can be sprayed any color powder. The powder was recovered by a powder recovery system conveyed to the electrostatic powder spray gun.
Unseparated powder is typically delivered to a post filter.
Color change and recovery
1. Open the suction device
2. Set the selector switch on the dense phase conveying is set to be "clean."
3. Remove the fluidized powder tube tank and a fluidized tank between the cyclone and the cyclone in the direction toward the purge.
4. Operation clamp rod.
5. The mesh screen spin out, clean with a vacuum cleaner, clean with compressed air blowing.
6. collecting funnel underneath the cyclone spin out 60% of compressed air is purged.
Off powder by air sucked into the cyclone and after the filter.
7. Carefully clean with compressed air gun to blow whirlwind.
The upper part of the cyclone is purged, especially outside of the dip tube.
8. Close the suction device.
9. The screening is up to spin stops, and operate the clamping lever.
10. Push the transmitter into the fluidized tank, inject new powder.
11. Ensure that all connectors are properly connected.
12. The system is ready to operate
