Easy Maintenance Fiber Laser Cutting Machine Materials Easy to Use for SS / CS
Description
Advanced fiber laser cutter
Main parts of laser cutting machine
CNC Software:
PC control, special cutting software for CNC laser cutting machine, high speed DSP movement control chip,
ensure motion accuracy. We have added many new function in the software:
1 . Automatic edge finding function, no need to use two point positioning manually.
2 . Kerf compensation function.
3 . Quickly import large files, enhance your working efficient.
4 . Breakpoint resume.
5 . When long line with short line overlap, it will automatically remove short one.
6 . One bottom setting. When you input one picture, the software will set all the cutting parameters like pulse
width, frequency...Automatically. When you change air cutting into Oxygen cutting, the software will also
change these parameters automatically
7 . Expense calculation.
8 . Cutting time simulation
9 . Scanning cutting. Non stop one sequence cutting until the laser head finish cutting all the lines in one
direction, thus can save a lot of time for tuning stop
10. Auto-focusing system can be controlled by software
11. Three level perforate. You can use software to control perforating time, height, power, air pressure and
speed to ensure there is no hole popping
12. Subtle connection. When cutting thin plate, you can use this function to leave a small connection part
during the process of cutting, to avoid collision between cutting pieces and laser head(Although there is
collision alarm, it can ensure the working continuity)
13. Nesting function. It can save the cutting material to it’s extent
External Cooling Water Circulation System with deionizater, filter, constant temperature control to avoid frequent change of the cooling water.
1 . The inside chassis use cold reduced sheet with baking finish. Split design with low noise and compact
structure
2 . The compressor of the cooling system, expansion valve, pressure controller and other control device are all
international famous brand to ensure the good quality of the machine and long term reliability.
3 . The water pump, water tank and coupling of the water circulation system are all made of stainless steel 304
material, no worry about the corrosion
4 . The water tank and the outlet are all equipped with filter and deion device to ensure the water electric
conductivity.
5 . The water chiller has the function of noise & light alarm in case of high & low temperature, water flow, water
pressure, water level and water quality.
6 . The system use electricity for heating, PLC control with ±0.3 control precision.
Specifications
Model | GS-LFDS6020 |
Laser source medium | Fiber |
Cutting range (L * W) | 6000 mm × 2000 mm |
Z axle stroke | 250 mm |
Max. positioning speed | 120 m/min |
X,Y axle Max. accelerate speed | 1.2G |
Cooling form | Water cooling |
Laser wavelength | 1070nm |
| 1000W / 1500W / 2000W 2500W / 3000W / 4000W (Optional) |
Min. cutting gap | ≤ 0.1 mm |
Positioning accuracy of X, Y and Z axles | ± 0.03 mm |
Repeated positioning accuracy of X, Y and Z axles | ± 0.01 mm |
Thickness of cutting material (according to material) | 0.2 - 25 mm |
Drive model | Imported servo motor |
Power requirement | 380 V, 50/60 Hz |
Working temperature | 5-45 |
Continuous working time | 24 Hours |
Machine weight | About 12130 Kgs |
Total protection level of power supply | IP54 |
Application
1. Can cut metal sheet/carbon steel/stainless steel/aluminum/copper/zinc
2. Petrochemical industry
3. Bus manufacturing
4. Steel construction
5. Medical equipment
6. Fitness equipment
7. Electrical engineering
8. Kitchen ware industry
9. Advertising brand
10. Precision machinery
11. Pipe processing
12. Metal processing
13. Sheet metal industry
