8.6 million holes / min laser microporous tipping paper perforating equipment
Description:
In the field of cigarette production, the tar content of cigarette harms the human health, as we know well. All the countries’ governments stipulate the tar content of cigarette and constantly enhance the norm of decreasing in tar content. There is more and more methods to decrease the tar content. Not only in tobacco planting, but also in use of chemical additives and improvement of filter tip, they all try their best. A layer of thin paper which coats outside of the filter tip is called tipping paper, through punching the mini holes in tipping paper by laser, it can penetrate certain air when smoking so as to decrease the tar content, which is a physical method of decreasing in tar content. At present, in the market the most popular method is utilizing laser to punch the mini holes in tipping paper, so the tipping paper laser punching machines are utilized widely. Proved by practice, the laser punching method is easy to test and is most efficient.
Specification:
General performance and parameters of HANSGS—D400P perforating machine
|
Laser power |
400W |
|
PLC control type |
closed-loop |
|
Controller |
Germany SIEMENS servo system |
|
Form feeding control |
Biaxial linkage control |
|
Indicator setting method |
Independent, simple |
|
Spectrophotometric method |
by polygon prism |
|
Permeability range |
100—2000cu |
|
Permeability instability |
Less than 5% (relative error) |
|
Maximum perforating speed |
1920 thousand /min |
|
Maximum perforating density |
4pcs/mm |
|
Minimum perforating density |
1pc/10mm |
|
Hole diameter range |
0.05—0.25 mm |
|
Hole shape |
oval or round |
|
Hole quality |
neat, without deckle edge or coking |
|
Maximum feeding speed |
650m/ min |
|
Perforating row number |
2-8 rows |
|
Acceleration time (0-300m/min) |
3sec. |
|
Total system power |
35KW |
|
Width range of processing tipping paper tray |
40-80mm |
|
Maximum processing winding tray diameter |
520mm |
|
After perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min) |
15M(front),2M(tail) |
|
Environment requirments |
20—30 Constant temperature |
|
Machine lifetime |
10 years |
|
Chilling water hardness |
250mg/L |
|
Gas consumption of laser head |
2.8L/min |
|
Temperature of cooling machine, adjusting range |
10-30 |
|
About the cooling machine temperature and adjusting precision, is there monitor display ? |
Yes, the adjusting precision is ±0.1. |
|
Chilling water flow speed |
25L/MIN |
|
Water storage capacity of chiller |
0.3M3 |
Application:
This set of equipment can realize ventilation and tar reducing through perforating tipping paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.
