.jpg)
Laboratory Oven :
- Drying, heating, hot preservation, hot sterilization (Poupinel), ageing of components, thermal tests in laboratories and industries.
- 2 temperatures: 200°C maximum or 300°C maximum (depending on the option). Eight sizes: from 27 litres to 980 liters.
- Several options and accessories to adapt the oven to your needs.
- Volumes : 27, 64, 125, 250, 343, 490, 686, 980 litres.
Performances :
Designed to operate from room temperature + 10°C up to 200°C or up to 300°C, as the thermal insulation and power rating depend on the maximum temperature required. Temperature fluctuation: less than ± 0,2 °C. Temperature spatial variation: less than ± 1,2°C at 105,0°C. Rapid heating-up times. Low surface temperature of outer casing.
Designed to operate from room temperature + 10°C up to 200°C or up to 300°C, as the thermal insulation and power rating depend on the maximum temperature required. Temperature fluctuation: less than ± 0,2 °C. Temperature spatial variation: less than ± 1,2°C at 105,0°C. Rapid heating-up times. Low surface temperature of outer casing.
Construction :
Ten sizes of ovens available from 18 to 980 liters. Inner casing is made of corrosion resistant stainless steel, type 304, bright polished. The outer case is made of sheet steel, finished in a tough stoved epoxy paint. (colour light grey) No contact between inner and outer case and an optimised insulation minimise heat dissipation. Walls and door are insulated with glass fibre. The insulation is 70 mm thick; this ensures efficicent operation, low external temperatures and excellent thermal stability. Silicone rubber gasket provides a good seal between the door and the oven body. The insulation and the gasket are asbestos-free. The door is hinged on the right hand side.
Ten sizes of ovens available from 18 to 980 liters. Inner casing is made of corrosion resistant stainless steel, type 304, bright polished. The outer case is made of sheet steel, finished in a tough stoved epoxy paint. (colour light grey) No contact between inner and outer case and an optimised insulation minimise heat dissipation. Walls and door are insulated with glass fibre. The insulation is 70 mm thick; this ensures efficicent operation, low external temperatures and excellent thermal stability. Silicone rubber gasket provides a good seal between the door and the oven body. The insulation and the gasket are asbestos-free. The door is hinged on the right hand side.
Heating :
Tubular heating elements are sheathed and made of stainless steel. Ideally placed around the fans. No-wear switching (solid state relay) is used for activating and deactivating the heating elements.
Tubular heating elements are sheathed and made of stainless steel. Ideally placed around the fans. No-wear switching (solid state relay) is used for activating and deactivating the heating elements.
Internal fan for air circulation :
All ovens are fan circulated models. The air flow speeds up the drying process and also evens the temperature distribution within the oven. The fan and heaters are in the rear of the oven, shielded from the workspace by a stainless steel baffle. Air is drawn into the fan from the centre of the oven and passes over the temperature sensor and the sheathed heater elements. The heated air is distributed around the baffle to both left and right and then re-circulated by the fan.
All ovens are fan circulated models. The air flow speeds up the drying process and also evens the temperature distribution within the oven. The fan and heaters are in the rear of the oven, shielded from the workspace by a stainless steel baffle. Air is drawn into the fan from the centre of the oven and passes over the temperature sensor and the sheathed heater elements. The heated air is distributed around the baffle to both left and right and then re-circulated by the fan.
Temperature control and safety :
Temperature sensor is thermocouple. Temperature is controlled by a precise microprocessor based controller that provides a high accuracy and prevents the set temperature from being exceeded. The independent over temperature thermostat cut out has an adjustable upper limit, giving a class 3.1 protection. The autotune PID digital controller digitally displays the set and actual values of temperature, and incorporates the heater indicator lamp. Control panel houses an ON/OFF switch, and a fault indicator lamp which lights when the safety thermostat comes into operation
Temperature sensor is thermocouple. Temperature is controlled by a precise microprocessor based controller that provides a high accuracy and prevents the set temperature from being exceeded. The independent over temperature thermostat cut out has an adjustable upper limit, giving a class 3.1 protection. The autotune PID digital controller digitally displays the set and actual values of temperature, and incorporates the heater indicator lamp. Control panel houses an ON/OFF switch, and a fault indicator lamp which lights when the safety thermostat comes into operation
Exhaust air, fresh air supply :
Through access vent, fresh air is provided and pre-heated before entering the chamber. A 30 mm diameter exhaust vent is provided with an adjustable valve to control the exhaust air flow.
Through access vent, fresh air is provided and pre-heated before entering the chamber. A 30 mm diameter exhaust vent is provided with an adjustable valve to control the exhaust air flow.
Equipment :
Multiple position shelving for convenient loading / unloading. Additional shelves are available. A 20-mm diameter access port with silicone cork is fitted as standard in the left-hand wall of the oven.Model | Internal dimensions (WxDxH) | External dimensions (WxDxH) |
RC-XU027 | 300 x 300 x 300 | 440 x 500 x 570 |
RC-XU064 | 400 x 400 x 400 | 545 x 600 x 675 |
RC-XU125 | 500 x 500 x 500 | 640 x 710 x 770 |
RC-XU250 | 500 x 500 x 1000 | 640 x 710 x 1270 |
RC-XU343 | 700 x 700 x 700 | 840 x 910 x 970 |
RC-XU490 | 700 x 700 x 1000 | 840 x 910 x 1270 |
RC-XU686 | 700 x 700 x 1400 | 840 x 910 x 1670 |
RC-XU980 | 1000 x 700 x 1400 | 1140 x 1015 x 1670 |
.jpg)
