ND-LAW-5B2 automatic armature winding machine will automatically feed armature; wind wire; index and cut wire. Operator only needs to load and unload armature from material loader. Equipped with touch screen and PLC, armature winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then the armature coil winding machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce the armature coil winding machine according to customer's armature accordingly.
Applications:
Automatic armature winding machine is used for automatically hook type commutator armature winding, The armature winding machine is suitable for winding medium and big wire diameter armature, especally for induction motor armature.
Specifications of this armature winding machine
Item | Specification |
Wire diameter | Magnetic hysteresis method:0.16~0.55mm |
Electric control method:0.30~0.85mm | |
Armature O.D range | 20~60mm |
Stack length | 10~60mm |
Shaft diameter | 3~17mm |
Shaft length | Less than 300mm |
Armature slot | Odd, Even slot |
Turn number | 0~9999 |
Commutator diameter | 18~40mm |
Winding speed | 0~3000 rpm |
Winding motor power | 2KW * 2 |
Angle detecting speed | 0~3000 rpm |
Angle detecting motor power | 0.75KW *1 |
Air supply pressure | 4~6 Kg/cm2 |
The machine total power | 4.0 KW |
Voltage | Three phase AC380V50/60Hz |
Weight | 1200Kg |
Dimension | 2000(length)X1300(width)X1800(height)mm |
Competitive advantages:
This machine can be equipped with an automatic feeding device to achieve a fully automatic operation. PLC and touch screen control. Double winding flyer, four tension is settable.
Rotor wound by this rotor winding machine
