Gas fired powder coating oven
| Outter Size: | L3000mm*W1000mm*H1500mm | |||
| Material: | t1.2mm galvanized plate | |||
| Thickness Insulation: | 120mm | |||
| Power supply: | GAS | |||
| Voltage: | 380V | |||
| Frequency: | 50-60Hz | |||
| Door type: | Double sided | |||
| Warm-up time: | 15 min. (180-220° C) | |||
| Homogeneity: | < ± 3°C if 185°C | |||
| Temperature stability: | < ± 1°C | |||
| Temperature max. | 230° C | |||
| Transport: | Top | |||
| Air circulation: | Forced | |||
| Band of burner: | Italian Riello | |||
| Model of burner | RIELLO 40 FS 20 | |||
| burner capacity: | 200,000 KCAL (81-220kw) | |||
| power of motor | 0.15KW | |||
| Total power of burner | 0.25KW | |||
| Warranty: | 12 Months | |||
Powder coating oven Installation:
1.use the key to open the door of the box
2.here connect the 3pcs live wire (L1 L2 L3)(10 square millimetre)
3,here connect the zero wire (N)
4. setting temperature189℃
5. setting time 25mins
6. turn on the power swtich
7. turn on bottom(green)
notice:if No.9 the direction of fan is correct,if turn on
this bottom,the the oven will begin to work., when
finished,the bell will ring..turn off ,push out the
workpiece. Next time ,just turm on the bottom will be ok.
8.turn off
