CO2 Jet Machine With DMX for CO2 Effect
Specifications
Voltage: AC220V 50Hz
Model:Q-300
Weight: 4KG
Size:27*12*43 (cm)
Operations
1. After received the CO2 machine, please open up the package to check the machine is damaged or missing parts, if there is a problem please contact with dealers.
2. When use this machine, please put the CO2 fast connector into the input gas interface, after check and confirm connect is firm, then open the cylinder valve.
3. Let the 512 signal line connected to 7,8 DMX 512; through the 9DMX Address to select the appropriate address code to dial. (the machine with one channel control)
4. Through the 2 adjustable screw to adjust the proper jets angle (360 degrees can be adjusted; note: do not spray directly on the people and to be away from at least 3 meters).
5. Finally, the machine can be fixed through the 12installation Hole (note: when installed in the height, please ensure to install fastness in order to avoid the risk of falling), and ensure the connection is correct, turn on the 11power.
Attentions
1. Before use the machine must be sure connection pipe connector connect with Co2 bottle firm and not wrong.
2. Operate the machine in the right way, do not let the children plays it
3. Do not spray at people directly and far away fire.
4. When demolition of connecting pipe, please ensure emptying completely tube gas.(If tube have gas, The air pressure can lead to pipe fly upward, please note easy accidentally injure)
5. Control switch have DMX512 and manual operation to choose.(Up is DMX, down is manual operation)
6. When the machine shoot up, there will be a little noise.Belongs to the normal situation.
Packing detail
One piece Q-300 CO2 Machine with 5Meter long CO2 pipe.
