Product Summary
The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Specification
Model | TS-80-2M | TS-150-2M | TS-225-2M | TS-408-2M | TS-1000-2M |
Capacity | 80L | 150L | 225L | 408L | 1000L |
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
Temperature range | -20℃~+150℃ | ||||
Temperature stability | ±0.5℃ | ||||
Temperature uniformity | ±2.0℃ | ||||
Humidity range | 20%~98%RH | ||||
Humidity stability | ±1.5% | ||||
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH | ||||
Heating up | heat up from -20℃ to +150℃,≤60mins | ||||
Cooling down | cool down from +20℃ to -20℃, ≤40mins | ||||
Ambient temperature | ambient temperature condition for the chamber working:+5℃~+35℃ | ||||
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish | ||||
Interior material | SUS304 stainless steel | ||||
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton | ||||
Refrigeration mode | mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling | ||||
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) | ||||
Refrigerant | environment protection R404A(DuPont) | ||||
Circulating fan | high temperature induction motorcentrifugal wind wheel | ||||
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater | ||||
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel | ||||
Control mode | curing input PLC control system | ||||
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input | ||||
Operation mode | fixed value and program | ||||
Program capacity | 120 porgrams and each program can set 100 sections | ||||
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk | ||||
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis | ||||
Water supply | pump drive | ||||
Water tank | 15L/20L food level PE water tank, available to clean dismantling. | ||||
water requirements | resistivity of humidifying water supply ?≥500MΩ | ||||
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads | ||||
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire | ||||
Single maximum currently(A) | 7A | 9A | 12A | 13A | 21A |
Rated power(KW) | 2.5KW | 4.5KW | 6KW | 8KW | 12KW |
Weight(KG) | 250 | 290 | 300 | 380 | 680 |
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding | ||||
Model | TS-80-4M | TS-150-4M | TS-225-4M | TS-408-4M | TS-1000-4M |
Capacity | 80L | 150L | 225L | 408L | 1000L |
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
Temperature range | -40℃~+150℃ | ||||
Temperature stability | ±0.5℃ | ||||
Temperature uniformity | ±2.0℃ | ||||
Humidity range | 20%~98%RH | ||||
Humidity stability | ±1.5% | ||||
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH | ||||
Heating up | heat up from -40℃ to +150℃,≤60mins | ||||
Cooling down | cool down from +20℃ to -40℃, ≤40mins | ||||
Ambient temperature | ambient temperature condition for the chamber working:+5℃~+35℃ | ||||
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish | ||||
Interior material | SUS304 stainless steel | ||||
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton | ||||
Refrigeration mode | mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling | ||||
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) | ||||
Refrigerant | environment protection R404A(DuPont) | ||||
Circulating fan | high temperature induction motorcentrifugal wind wheel | ||||
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater | ||||
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel | ||||
Control mode | curing input PLC control system | ||||
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input | ||||
Operation mode | fixed value and program | ||||
Program capacity | 120 porgrams and each program can set 100 sections | ||||
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk | ||||
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis | ||||
Water supply | pump drive | ||||
Water tank | 15L/20L food level PE water tank, available to clean dismantling. | ||||
water requirements | resistivity of humidifying water supply ?≥500MΩ | ||||
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads | ||||
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire | ||||
Single maximum currently(A) | 8A | 10A | 13A | 14A | 24A |
Rated power(KW) | 3.5KW | 6KW | 7KW | 9KW | 13KW |
Weight(KG) | 260 | 310 | 320 | 400 | 700 |
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding | ||||
Model | TS-80-7M | TS-150-7M | TS-225-7M | TS-408-7M | TS-1000-7M |
Capacity | 80L | 150L | 225L | 408L | 1000L |
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
Temperature range | -70℃~+150℃ | ||||
Temperature stability | ±0.5℃ | ||||
Temperature uniformity | ±2.0℃ | ||||
Humidity range | 20%~98%RH | ||||
Humidity stability | ±1.5% | ||||
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH | ||||
Heating up | heat up from -70℃ to +150℃,≤60mins | ||||
Cooling down | cool down from +20℃ to -70℃, ≤40mins | ||||
Ambient temperature | ambient temperature condition for the chamber working:+5℃~+35℃ | ||||
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish | ||||
Interior material | SUS304 stainless steel | ||||
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton | ||||
Refrigeration mode | mechanical vapour compression refrigeration-cascade cycle;air-cooling/water cooling | ||||
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) | ||||
Refrigerant | Environment protection R404A+R23(DuPont) | ||||
Circulating fan | high temperature induction motorcentrifugal wind wheel | ||||
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater | ||||
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel | ||||
Control mode | curing input PLC control system | ||||
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input | ||||
Operation mode | fixed value and program | ||||
Program capacity | 120 porgrams and each program can set 100 sections | ||||
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk | ||||
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis | ||||
Water supply | pump drive | ||||
Water tank | 15L/20L food level PE water tank, available to clean dismantling. | ||||
water requirements | resistivity of humidifying water supply ?≥500MΩ | ||||
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads | ||||
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire | ||||
Single maximum currently(A) | 11A | 14A | 16A | 16A | 28A |
Rated power(KW) | 5KW | 8KW | 9KW | 10KW | 16KW |
Weight(KG) | 320 | 340 | 350 | 430 | 730 |
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding | ||||
