Pass-Thru powder coating booth
Parts enter the booth through the conveyor openings, then pass the coating operator stations to receive the coating. The powder overspray is entrained within the air stream moving to the collector module, where the cartridge filters will remove the particulate.The containment air is drawn through the air handler's primary and final filter system before being discharge back into the room. Coated parts exit the booth for conveyance to the cure oven.
Turn on
1. Turn on the poer,Press the turn on fan blue bottom.
2. turn on the powder coating gun, Start to spray.
3. after 30 mins powder coating, please press the pulse bottom to make the powder which attached onto the filter dropping.
Turn off
1. Turn off the fan ,clean up the powder which dropped into the booth
2. turn off the power.
