Off-center Plastic Creasing Matrix

Off-center creasing matrix Quick Details Place of Origin: Beijing,Website:http://www.bjgraphic.net, China (Mainland)Brand Name: GraphicModel Number: GRD0.3x1.2Channel Height: 0.3 mmChannel Width:1.2 mmBased Width: 10 mmPunching Time: 30000-50000Locator Color: WhiteApplication: For box makingMachines: Manual/Semi-Automatic die cutting machinesCertificate: SGSIt's used when two creasing rules are near to each other on the die cutting board.Packaging & Delivery Packaging Details:70cm/pc, 50pcs/box, 1.0kgs/box, 10boxes/carton, Carton: 73 x 20 x 16cm(length x width x height), 550-750boxes/palletDelivery Detail:Within 5-13 days upon receipt of paymentFeatures:  1. World's most advanced plastic creasing matrix made from pvc material for medium &short -run job.  2. New and strong adhesive removes cleanly from the plate after use, will not move about during die cutting jobs  3. Special sizes available to suit all bard types, off-centers and multi-crease for close creasing rule  4. It is extremely durable and accurate and provides benefits in time and cost.  Notes: OEM and special sizes are available upon customer's demands.  PVC-based Size Table           H x W mm H x W mm H x W mm H x W mm H x W mm GRB 0.3×0.8GRB 0.5 x 1.0GRB 0.6 x 3.2GRB 1.0 x 3.0GRZ0.3x0.8GRB 0.3×1.0GRB 0.5 x 1.2GRB 0.6 x 3.5GRB 1.0 x 3.2GRZ0.3x1.0GRB 0.3×1.2GRB 0.5 x 1.3GRB 0.7 x 2.1GRB 1.0 x 3.5GRZ0.3x1.2GRB 0.3x1.3GRB0.5x1.4GRB0.7x 2.3GRB 1.0 x 4.0GRZ0.3x1.3GRB 0.3×1.4GRB 0.5 x 1.5GRB 0.7 x 2.5GRB 1.0 x 4.5GRZ0.4x0.8GRB 0.3×1.5GRB 0.5 x 1.7GRB 0.7 x 2.7GRB 1.0 x 5.0GRZ0.4x1.0GRB 0.4×1.0GRB 0.5 x 1.9GRB 0.8 x 2.5GRB 1.2 x 4.0GRZ0.4x1.2GRB0.4x1.2GRB0.6x1.7GRB0.8x2.7GRB 1.2 x 4.5GRZ0.4x1.3GRB0.4x1.3GRB0.6x1.9GRB0.8x3.2GRB 1.2 x 5.0GRZ0.4x1.4GRB0.4x1.4GRB0.6x2.3GRB0.8x3.5GRB 1.2 x 6.0GRZ0.5x1.0GRB0.4x1.5GRB0.6x2.5GRB0.8x4.0GRB 1.4 x 6.0GRZ0.5x1.2GRB0.4x1.6GRB0.6x2.7GRB0.8x5.0GRB 1.4 x 7.0GRZ0.5x1.3GRZ0.5x1.4GRZ0.5x1.5GRZ0.5x1.6GRZ0.5x1.7GRZ0.5x1.9Operation Procedure      Cardboard      Weight(g)Thickness of        Cardboard(mm)The height of Creasing Rules(mm)23.5023.4023.3023.2023.1023.002000.28mm0.3×1.00.4×1.0　 　 　 　 2500.35mm0.3×1.20.4×1.20.5×1.2　 　 　 3000.42mm0.3×1.30.4×1.30.5×1.4　 　 　 3500.50mm　 0.4×1.40.5×1.50.6×1.5　 　 4000.56mm　 　 0.5×1.60.6×1.6　 　 4500.63mm　 　 0.5×1.70.6×1.70.7×1.7　 5000.70mm　 　 　 　 0.7×1.70.8×1.7Notes: the specifications above are only recommendation, among which the specifications marked with are recommended to choose firstly.1. Measure the length of the creasing rule    2. Mount the cutting piece into the creasing rule with locator 3. Transfer the matrix to the die cutting steel plate 4. Remove all of the locators               Calculation Formula  Method to choose creasing matrix size for cardboard paper. Size table ( subject to 23.8 mm die-cutting rules)For instance: the thickness of the cardboard: 0.52mm; the thickness of creasing rules: 0.71mm, according to calculation formula: A=0.52≈0.5(mm); B=0.52 x 1.5 +0.71 = 1.49 ≈1.5(mm),so we should choose the size of 0.5 x 1.5.  Method to choose creasing matrix size for corrugated paper. Size table ( subject to 23.8 mm die-cutting rules)      Corrugated Paper Thickness of corrugated paper after compression Height of creasing rule Choice of creasing matrix(thickness of creasing rule       is 1.05mm) Choice of creasing matrix(thickness of creasing rule      is 1.42mm) F-Flute0.50mm23.20mm0.5×1.7　 E- Flute0.65mm23.10mm0.7×2.3_E- Flute0.75mm23.00mm0.8×2.5_B- Flute0.85mm22.90mm0.8×2.70.8×3.2B- Flute0.95mm22.80mm1.0×3.01.0×3.5C- Flute1.05mm22.70mm1.0×3.21.0×3.5C- Flute1.15mm22.60mm_ 1.0×4.0Remarks: the above blanks just for reference and the exact specification suitable for your job should be chosen according to your actual conditions and material thickness.