Adapter Sleeve d1 3 7/16-7 3/16 inch

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated

Basic design
ADP adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip. The sleeves are slotted and have an external taper of 1:12. ADP supplies–metric adapter sleeves, series designations H and OH–metric adapter sleeves for shafts with inch dimensions, series designations HA, HE and HS–adapter sleeves with inch dimensions, series designations SNW and SNP
Materials
The materials using in ADP adapter sleeves are carbon steel with a tensile strength at least 430N /mm²,
Dimensions
The dimensions of metric ADP adapter sleeves are in accordance with ISO 2982-1:1995; except the bore diameter of metric sleeves for inch shafts.The dimensions of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Tolerances
The bore diameter of metric ADP adapter sleeves is to tolerance JS9, the width to h15.The tolerances of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Thread
Metric ADP adapter sleeves up to size 40 have metric threads with 6g tolerances, according to ISO 965-3:1998. Larger adapter sleeves have metric trapezoidal threads with 7e tolerances, according to ISO 2903:1993.ADP adapter sleeves with inch dimensions up to and including size 64 (12 inch shaft diameter) have Unified Special Form threads (based on the old American National form, class 3 design). Larger sleeves have Acme Class 3G, General Purpose threads.

Shaft tolerances
Generally, the form tolerances must be kept within narrow limits as the accuracy of form directly affects the running accuracy of the bearing. shafts should be to an h9 tolerance but the cylindricity should be to IT5/2 according to ISO 1101:2004.
Model:HA220 HA320 HE220 HE320
            HA2320 HA2324 HA2326 HA2328 HA2330 HA2332 HA2334 HA2336 HA2338 HA2340
            HA3024 HA3026 HA3028 HA3030 HA3032 HA3034 HA3036 HA3038 HA3040
            HA3124 HA3126 HA3128 HA3130 HA3132 HA3134 HA3136 HA3138 HA3140
            HE2320 HE2324 HE2326 HE2328 HE2330 HE2332 HE2334 HE2336 HE2338 HE2340
            HE3024 HE3026 HE3028 HE3030 HE3032 HE3034 HE3036 HE3038 HE3040
            HE3124 HE3126 HE3128 HE3130 HE3132 HE3134 HE3136 HE3138 HE3140