Strong Strucutre Galvanised Steel Z Section Purlin Roll Forming Machine With 3 Tons Hydraulic Decoiler
Machine Components of Z Profile Purlin Roll Forming Line
(1) Coil decoiler-------------------------------------------------1 set
(2) Feeding and levelling device----------------------------1 set
(3) Main corrugating machine-------------------------------1set
(4) Hydraulic punching device-------------------------------1 set
(5) Hydraulic cutting device-----------------------------------1 set
(6) PLC control system-----------------------------------------1 set
(7) Supporting tables-------------------------------------------2 sets
Main Parameters of Z Profile Purlin Roll Forming Line
(1) Decoiler
| Decoiler Type | Manual or Automatic |
| Loading Capacity | 3 tons or above |
| Inner Diameter of Roll | 508mm |
| Outer Diameter of Roll | 120mm |
| Suitable Roll Width | Max. 600mm |
(2) Feeding and Leveling Device
These devices are used to guide and level the steel strip before rolling into the main corrugating machine.
(3) Main Corrugating Machine
Main motor power: 15KW
Forming speed: 10-15m/min
Material of roller : GCr15 steel
Roller stations: 15 groups
Material of main rolling shafts: No. 45 steel with heating treatment
Diameter of main rolling shaft: ø75mm
(3) Hydraulic Punching & Cutting
Punching mould material: Cr12 mould steel
Punching die material: Cr12 mould steel
Cutting blades material: Cr12 mould steel
Hydraulic motor power: 5.5KW
Hydraulic Pressure: 16MPa
(4) PLC Control System
The worker can operate the plc control system to rollforming, punching holes and cut the purlin sheets into desired length automatically.
PLC: Mitsubishi from Japan
Frequency Inverter: Mitsubishi from Japan
Touching Screen: Mitsubishi from Japan
Voltage: 380V/3 Phase/50Hz or designed for customers' demand
(5) Supporting Tables
We are supplying two pieces as runout tables for the finished Z purlines panels
Application
