15Kw Waste Tyre Recycling Machinery Rubber Powder Production Eco Friendly
Specifications
| Type | ZY1250 |
| Working voltage | Three phase 380V/50Hz |
| Motor power | 15KW |
| Applied Tire Outer Diameter | ≤ 1200mm |
| Cooling method | Circulating water cooling |
| Anti-wear hydraulic oil | 40# |
| Oil Volume | 400L |
| Extracting Cylinder working stroke | 1250mm |
| Cutting cylinder working stroke | 350mm |
| Extracting Cylinder working pressure | ≤20 MPa |
| Pressing cylinder pressure | ≤10 MPa |
| Handling Capacity | 28-38 pcs/hour |
| Dimension | 4100X870X1550mm |
| Machine Weight | 2200kg |
The advantages of two roll mill:
1. Crusher roller speed ratio: Ours is 1: 2.5, while the old type roller speed ratio is 1: 1.38.
2. Roller structure: Our two rollers are both grooved, which increase the friction and then
improve the output, while the old type is one with groove, and the other is smooth.
3. Roller material: The roller is made by Welding wear resistant alloy materials, 5Cr6MnMo.
We can offer you 3 years warranty of the roller. While the old types machine use cast iron to
make the rollers, very easy to break or crack in two .
4. Machine feature: Our machine is energy saving 1/3. For example, producing 1T powder,
our machine electricity consumption is only 150°, while their electricity consumption is about
250- 280° in making 1T powder.
5. Bearing: Our machine use rolling bearing, there are 8 pieces bearing inside, while the old
machine use the slide bearings ( bush) , which is not as good as ours.
The brief description of tire processing:
1. First, we need to cut and draw out the bead wire of the tire by the Compound Tire Cutter
and Extractor,
2. Then we can put the tire into the Tire Crusher by the conveyor, the tire will be crushed
into small pieces with the size of 50x50mm.
3. And those small pieces will be conveyed to the Secondary Crusher to be crushed into
small particles of 6-12mm.
4. Now we need a Magnetic Separator to separate the steel fiber from the rubber particles,
and a Square Magnetic Vibrator to separate the coarse fiber from the rubber particles by
vibrating.
5. The coarse fiber will be collected in a box and the rubber particles will be delivered to a
third Rubber Shredder to be shredded smaller of 1-4mm.
6. And then we need a Static Vibrator to gather the small fiber into clumps by static force,
and to filter the rubber particles by screen.
7. The fiber clumps will be stored in the Fiber Collecting Machine by conveyor, while the
rubber particles will be sent to the Airflow Classifier,
