Low Toxicity Fm200 Fire Suppression System Electric Insulation
Parameter:
| No. | specification | Technical Parameter | |
| 1 | Filling pressure | 4.2Mpa | |
| 2 | Scale of Protective region for one zone | area:max single-zone is 800m² volume:max single-zone is 3600m³ | |
| 3 | Spraying time | ≤10s | |
| 4 | Filling density | ≤950kg/m3 | |
| 5 | power | DC24V/1.6A | |
| 6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20) | |
| 7 | Condition of reserving room for container | temperature: -10~50, relative humidity: ≤97% | |
| 8 | max working pressure | 5.3Mpa | |
| 9 | min working pressure | 4.2Mpa | |
Description:
1. Electric insulation, utilization for extinguishing of electrical combustion
2. No residue and pollution inside protection zone
3. Accurate control of protection zone
4. No need for employment of monitor staff
5. Agent quantity for biggest zone is enough to protect all zones through selector valves
6. Direct target to expensive machine or delicate device
Competitive Advantage:
1. clean gas agent
2. colorless, tasteless, low toxicity, and non-conductive
3. no residue or oily deposits
4. small storage space and easily pressurized in cylinder
5. compliance with environmental protection requirement
6. Large range of application area
7. Management of multiple zones
8. Efficient fire protection in big region
Simulated diagram:
Below attached is one mimic diagram of piped network type of fm200 automatic fire suppression system,
