Alloy Steel / Carbon Steel Laser Cutting Machine High Stiffness Water Cooling Way
Typically carbon steels are stiff and strong. They also exhibit ferromagnetism (i.e. they are magnetic). This means they are extensively used in motors and electrical appliances. Welding carbon steels with a carbon content greater than 0.3 % requires that special precautions be taken.
However, welding carbon steel presents far fewer problems than welding stainless steels. The corrosion resistance of carbon steels is poor (i.e. they rust) and so they should not be used in a corrosive environment unless some form of protective coating is used.
Advantages
Low cost
Wide variety available with different properties
High stiffness
Magnetic
Most carbon steels are easy machine and weld
It is mainly for cutting sheet metal below 8mm in high speed and high precision. Fiber laser has a series of advantages, such as high beam quality, high brightness, high conversion rates, maintenance-free, stable and reliable operation of low cost and small size, etc. Air-assisted cutting is the most advanced level of laser cutting.
Model | HECF3015IE-500 | HECF3015IE-700 | ||
Laser medium |
Semiconductor pumped continous yb-doped fiber |
|||
Max cutting range | 3000mm*1500mm | |||
Max cutting speed | 18 m/min | 21 m/min | ||
Cooling way | Water cooling | |||
Laser wave length | 1070nm | |||
Laser output power | 500W | 700W | ||
Laser input power | 2KW | 3KW | ||
Min line width | ≤0.1mm | ≤0.125mm | ||
Cutting depth
(up to materials)
|
0.2--6mm | 0.2--8mm | ||
Driving way | Imported servo motor | |||
Tranmission way | Y-axis importe gear rack double driver,X-axis imported ball screw | |||
Power requirements | 380V/50HZ | |||
Environment temperature | 5—35 °C | |||
Continous working time | 24 hours | |||
Weight of the machine | 3000 kg | |||
Outline size | 4430mm*2348mm*1730mm (length*width*height) |