Lathe parameter | TCNZ-20D | TCNZ-26D | TCNZ-32D |
Standard NC System | Taiwan-SYNTEC | Taiwan-SYNTEC | Taiwan-SYNTEC |
Max Machining Diameter | 20mm | 26mm | 32mm |
Max Machining Length | 245mm/ ¦ 2D/1 clamping | 320mm/ ¦ 50/1 clamping | 320mm/ ¦ 2D/1 clamping |
1 clamping ¦ Z1 range 40min | 1 clamping ¦ | 1 clamping ¦ Z1 range 64 min | |
Max drilling diameter of spindle | Ø10mm | Ø13mm | Ø13mm |
Max drilling depth of spindle | 40mm | 50mm | 50mm |
Spindle Through-hole diameter | Ø23mm | Ø28mm | Ø33mm |
Spindle Rotating speed | 6000rpm | 6000rpm | 6000rpm |
Max diameter of rotary tools | Ø10mm | Ø13mm | Ø13mm |
Max speed of rotary tools | 5500rpm | 5500rpm | 5500rpm |
Sub spindle holding bar diameter | Ø20mm | Ø26mm | Ø32mm |
Max drilling diameter of sub spindle | Ø10mm | Ø13mm | Ø13mm |
Sub spindle rotating speed | 6000rpm | 6000rpm | 6000rpm |
Tools quantities | 18 | 19 | 19 |
Combo turning tools | 6 | 6 | 6 |
Side rotating tools | 4 x ER16 | 4(3 X ER16+1 x ER20) | 4(3 X ER16+1 x ER20) |
Front drilling tools | 4 x ER16 | 5 x ER20 | 5 x ER20 |
Back drilling tools | 4 x ER16 | 4 x ER20 | 4 x ER20 |
Tools Size | |||
Turning Tools | □12mm | □12mm | □12mm |
Side rotating tools collet | ER16 | ER16 ER20 | ER16 ER20 |
Collet for drilling sleeve | ER16 | ER16 ER20 | ER16 ER20 |
Rapid feed speed | |||
X1/X2 | 18m/min/24m/min | 18m/min/24m/min | 18m/min/24m/min |
Y1/Y2 | 24m/min/18m/min | 24m/min/18m/min | 24m/min/18m/min |
Z1/Z2 | 24m/min/24m/min | 24m/min/24m/min | 24m/min/24m/min |
Motor | |||
Spindle Motor | 3KW | 4.4KW | 4.4KW |
Rotating Tools Motor | 0.75KW | 0.75KW | 0.75KW |
Sub spindle Motor | 3KW | 3KW | 3KW |
Axle Motor | 0.75KW | 0.75KW | 0.75KW |
Power Capacity | 15KVA | 18KVA | 18KVA |
Air Pressure | 0.6MPa | 0.6MPa | 0.6MPa |
Lathe Net Weight | 3500kg | 3700kg | 3700kg |
Size(L*W*H) | 2100 x 1350 x 1800 mm | 2400 x 1400 x 1800 mm | 2400 x 1500 x 1900 mm |
Option Parts parameter | |||
Spindle End face Power unit | |||
Power unit No. | 3 | 3 | 3 |
Power unit collet standard | ER16 | ER16 | ER16 |
Power unit power | 0.75KW | 0.75KW | 0.75KW |
Max rotating speed | 5500rpm | 5500rpm | 5500rpm |
Fixed drilling collet | 4*ER16 | 4*ER16 | 4*ER16 |
Y2 axle + Sub spindle power unit | |||
Power unit quantities | 4 | 4 | 4 |
Power unit collet standard | ER16 | ER16 | ER16 |
Power unit power | 0.75KW | 0.75KW | 0.75KW |
Max Rotating speed | 5500rpm | 5500rpm | 5500rpm |
Fixed Drilling collet | 4*ER16 | 4*ER16 | 4*ER16 |
Y2 axle rapid feed speed | 18m/min | 18m/min | 18m/min |
Y2 axle motor power | 0.75KW | 0.75KW | 0.75KW |
Deep Drilling hole Parts | |||
Tools quantities | 2 | 2 | 2 |
Collet standard | ER16 | ER16 | ER16 |
Max Processing Depth | 105 | 105 | 105 |
High-pressure pump power | 1hp | 1hp | 1hp |
Max cooling Hydraulic Pressure | 7MPa | 7MPa | 7MPa |
Cooling Liquid flow rate | 16L/min | 16L/min | 16L/min |
Filtering Precision | 180 µ | 180 µ | 180 µ |
Standard Configuration | ||||
Name | Origin | Brand | Remark | |
Lathe bed | China | High strength dense cast iron (first class HT300) , two aging treatment | ||
NC System | Taiwan | SYNTEC | Optional FAUNC. MISUBISHI | |
Bearing | Japan | NSK | precision P4 level group angle bearings | |
Guide rail | Germany | SKF | ||
Ball Screw | Taiwan | PMI | ||
Screw Bearing | Japan | NSK | ||
spindle motor | Japan | YASKAWA | ||
axle motor servo | Japan | YASKAWA | ||
Monitor | Japan | YASKAWA | ||
Electric Switch | France | Schneider | ||
Electric Relay | France | Schneider | ||
Travel switch | Japan | azbil yamatake | ||
Penumatic system | Taiwan | AirTAC | ||
Cooling system | Taiwan | |||
lubrication system | USA | BIJUR | ||
chip bucket | China | Large size,easy to clean | ||
Tools holder | China | Row type tools holder,faster tools change,high efficiency | ||
Full enclosed Protection | Safety | |||
Fixed Guide Sleeve | ||||
Automatic Short Parts Receiver | ||||
3 Color Light | ||||
Optional Configuration | ||||
Mitsubishi NC System | Japan | Or FAUNC optional | ||
Synchronal Rotary Guide Sleeve | Or Non Guide sleeve | |||
Short part conveyer belt | ||||
Automatic Long part Receiver | ||||
Deep hole drilling parts | ||||
Guide sleeve & Chuck(custom-made) | ||||
Auto-feeder | ||||
Processing device without guide sleeve | ||||
Spindle end power unit | ||||
Y2 axle + Sub spindle power unit | ||||
