Welded steel tube reducing sizing mill
Description:
I. Summary
The mill is intended for manufacturing round pipe Φ32mm-Φ89mm with thickness of 1.5mm–4.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe
II. The technical flow of the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
2.Is to roll the steel strip of different sizes to the corresponding tube blanks of straight seam continuously through roll type forming, cage roll forming and FF/FFX forming ,then heated the tube edges to the welding temperature via high frequency induction or contact heating and completed the welding under the extrusion of the squeeze roller, after cooling ,sizing and strightening to be the requested straight seam steel pipe. Mainly composed by the forming section, the welding section, the sizing section, the transmission system and the electrical system etc.
Give technical suggestion
Provide After-sales service 24hr × 7days per week
1. Test the machine before shipment
2. Provide technical guidance relate to use the machine
3. Supply one-year warranty period for the machine
4. Provide the spare parts at cost price after warranty period
5. Collect the feedback for the machine working
