Building Material Self Levelling Cement Concrete For Vinyl Flooring 5 - 30
Building Material Self Leveling Cement Concrete For Vinyl Flooring
This product is produced with excellent formulation using special cement ,fine aggregate and spray-dried dispersible polymer powder and special additives. It is high fluidity and plasticity. It is widely apply to the residence,and business buildings.
Technical Specification(23,humidity 50-55%)
| Item | Requirement |
| Fluidity(cm) | ≥13 |
| Working Time | About 20min |
| Compressive Strength | (MPa)≥22(after 28days) |
| Split Strength | (MPa)≥4.0(after 28days) |
| Application temperature | 5-30 |
| Quality Guarantee Period | 6months |
| Theoretical application rate | 6-7/25KG |
| the mixing ratio | 25kg cement : 6.5kg water |
| Packaging Details: | 25kg laminated paper bag |
| The time of Laying the flooring | Above 24h |
| Appearance | Grey powder |
| Bulk density(kg/L) | 1.4kg/L |
Features of performance:
1. High fluidity, is capacity to extend service life and decorative effect of various floor covering
2. Easy to apply, quick setting, various floor-covering materials can be applied after short time.
3. High compressive and the tensile strength and alkali resistance.
4. Economical and practical and Environmental friendly
Application Instruction:
The surface should be clean, dry and strong without loose part. The substrate should be cleaned thoroughly. Before application of the compound the substrate should be applied by proper primer. When the primer is absorbed and the substrate is in a half-dry state, Start self leveling construction .
First, mix the product with water in the mixing ratio of self-leveling cement: water=25:6.5kg. The mixing method is: pour clean water into a suitable container, then add self-leveling cement while stirring vigorously until uniform viscous mixture is formed.
Pour the mixture on the area to be applied, spread the material uniformly to required thickness using toothed rake (range of thickness is 1-4mm).The mixture must be finished in 20min.
It is the next step to remove entrance air by particular roller.
Various flooring materials can be applied on it after dry.
