LPW-02
Wind Turbine Slip Ring
Description
LPW-02 Wind Turbine Slip Ring This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation.
This is constantly being extended in order to meet the developments in signal and data Transmission. JINPAT has developed a com-prehensile standard programmed that is able to offer optimum solutions. The standard programmed enables the creation of slip ring bodies of any number of poles up to 100 for power and data/signal currents. Slip ring bodies can be supplied either as open slip ring bodies to be built per customers 'requirements or in a housing of impact-resistant plastic or sheet metal.
Features:
1. 3 circuits models
2. Electrical data
3. Compatible with data bus protocols
4. Sealed units are also available
5. Control and data transmission
6. Wiring and max. number of poles
7. More technical details
8 Volume of delivery
9. Flexible, color-coded, silver-plated, insulated lead wires
10. Precision ball bearings meet or exceed life requirements for most commercial application.
Advantage:
1. Digital signals up to max. 500 kB
2. Amperages up to 1200 A and volt- age up to 24 kV
3. Diameters > 10 m high rotation speed
4. Extreme operating conditions
5. Protection class: IP 43
Main Application
Wind turbine generator
Option
1. Reinforced bearing
2. Tube and rotary transmission
3. Heating
4. Vent plug
5. Fiber data transmission
Specification | |
Poles | 3 |
Operating Speed | 0-300rpm |
Working Temperature | -35℃~ +50℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 1000VAC/DC or higher |
Current Rating | 30A per circuit |
Dielectric Strength | ≥500V@50Hz between each circuit |
Insulation Resistance | 1000MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Mechanical: | |
Contact Material | Carbon Brush |
Lead Wire Size | High Temperature Resistant Material |
Lead Wire Length | Standard 250mm(9.843inch) |
Protection
| IP43 or higher |
