FEIFU-668T-H Powder Coating Spray Gun
This powder coating gun is suitable for the coating of every workpiece, simple, flat workpieces, workpieces with complicated shapes and the over-coating of workpieces which are already coated.
It can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
It can reduce orange peel effect significantly compare to common Electrostatic Coating machine.
It has four pre-set programs.
2. Technical Data
1. Power range 220V/110V
2. Frequency 50HZ /60HZ
3. Temperature range in use -10 +50 degrees centigrade
1. Gun weight: ^^^ 500g
2. Rated output voltage ^… 24VDC
3. Input voltage ^^… - 200kv
4. Maximum output current ^… 180Ua(max)
5. Maximum output voltage^^ 0-100KV ( adjustable)
6. Maximum powder injection :^… 600g/min
7. Polarity ^^^ negative (-)
1. Maximum input-air pressure ^^.. 10kg/cm
2. Optimum input-air pressure^.. 6kg/cm
3. Minimum input-air pressure ^ 4kg/cm
4. Maximum water vapor content or compressed air ….. 1.4g/N m3
5. Maximum oil vapor content of compressed air ^.. 0.1ppm
6. Maximum compressed-air consumption^… 13.2 m3/h
1. Main parts of the whole small manual powder coating machine
Powder spray cup gun=1
Spare parts of gun=(round jet nozzle=1, flat jet nozzle=1 ,deflector=8)
Earth wire with clamp=1
Black venting tube=1
Venting tube connector=1, earth wire=1
Air tube (8mm)=4
Air tube (6mm)=1