Shot Blasting Machine With 8 Shot Blasters For Cleaning Rusty Spot, Rusty Scale, Welding Slag On Plate Surface
1. Specifications:
| Model | HGP1018-8 |
| Width × height | ≤1000×1800mm |
| Length | 3000-15000mm |
| Quality requirement | Sa2.5, Ra15-50 |
| Impeller head (8) | |
| Model of impeller head | Q034II |
| Quantity of shot-blasting | 8×200kg/min |
| Turning speed | 2950r/min |
| Shot blasting speed | 65-70m/s |
| Power of shot-blasting machine | 8×11KW |
| Work-piece conveying system | |
| Length of input roller conveyer | 15000mm |
| Length of output roller conveyer | 15000mm |
| Load capacity of roller conveyer | 1000kg/m |
| Conveying speed | 0.4-4m/min |
| Power of curtain separator | |
| Driving power | 5.5kw |
| Width of curtain | 2000mm |
| Steel shot diameter | 1.2-1.8mm |
| Model of dusting system | LMF-I |
| Discharge quantity | 120mg/m3 |
| Wind speed of the gate | 5m/s |
| Handling volume of dusting system | 18000m3/h |
| Quantity of filter core | 18 |
| Cleaning system ventilator power | 15kw |
| Overall power | ≈140Kw |
2. Description:
Working Principle: The work-piece lies on the roller conveyer to set speed through the shot-blasting chamber. Before the work-piece getting into the shot-blasting area, start on the shot feeding device, at the same time, the impeller heads begin running on load. After the strike of high speed shot bundle, the scale, dirt and scaffold on the surface of work-piece will be cleaned. The working is cycling and continued until no work-piece get into, then close shot valve and the impeller head stop working.
3. Goods supply range
a. Cleaning room assembly: main cleaning room, sub-cleaning room, rubber curtain, guard plate for shot-blasting room, impeller head;
b. Roller converter: outdoor roller conveyer, indoor roller conveyer, chain, chain wheel;
c. Screw conveying system: longitudinal screw conveying system, feed screw conveying system, hoister, and separator, shot supply valve;
d. Dust palletizing system: dust pipe, duster, fan, wind pipe, chimney and reverse blowing clean device;
e. Electric controlling assembly: electric controlling box.
f. Spare parts (vulnerable parts):
