4-roller Rolling Machine With Max Rolling Thickness 40mm For Metal Sheet
1. Specifications:
| Model | W12NC-40X4100 |
| Max rolling thickness | 40mm |
| Max pre-bend thickness | 30mm |
| Max rolling width | 4100mm |
| Plate yield limit | 245Mpa |
| Min diameter when full capacity | 1600mm |
| Upper roller diameter | 700mm |
| Lower roller diameter | 650mm |
| Side roller diameter | 550mm |
| Rolling speed | 4.5m/min |
|
Working pressure of hydraulic system |
16MPa |
2. Description:
Rolling techniques
a. The plate put between top and bottom roller, bottom roller will elevate and clamp plate end.
b. Left side roller elevating, pre=bending the right end.
c. Top roller rotating make right move.
d. Right side roller elevate , left side roller down at same time , which make pre-bending of left side .
e. Adjusting side roller again until form round shape.
Supply range and technical documents
Supply range
a. Mian machine body: 1 set
b. Foundation bolt: 1 set
c. Hydraulic pump station: 1 set
d. Control cabinet and operation table: 1 set for each
Technical document
a. Seller will supply installation drawing
b. Manual; Electric principle drawing; Certificate; Packing list.
