Cantilever Type Submerged Arc Welding Machine(single arc single wire) for Box Beam Production Line
1. Specifications:
| Suitable work-piece size | 300-1200mm |
| Welding speed | 0.3-1.5m/min |
| Feed and feed-back speed | 3m/min |
| Gauge | 1400mm |
| Gas pressure | 0.4-0.8Mpa |
2. Description:
The submerged arc welding machine is mainly used for submerged arc welding of box beam. It consists of lining trolley, welding arm, welding torch mechanical tracking device, pneumatic system, electric control system, welding flux conveying and recovering system and submerged arc welding power.
The welding modes are mainly including single arc single wire and double arc double wire. The single arc single wire submerged arc welder can be equipped with Chinese submerged arc power pr imported submerged arc power flexibly. The double arc double wire submerged arc welder has high welding efficiency. It’s usually equipped with submerged arc power of American Lincoln DC-1000 and AC-1200.
Electric control system is fixed inside the stand column. And operation panel is on the door of electric control box. The electric control system is mainly used to control the movement of cart, elevation and subsidence of welding arm, start and stop of welding power, and the start-stop of flux recycle system. Movement of cart is frequency control; it can change speed if necessary.
3. Goods supply range
a. Cart assembly: moving cart, motor reducer, stand column, and beam.
b. Welding arm and tool carriage: welding arm, tool carriage, and motor reducer.
c. Weld tracker: arc guiding frame, arc guiding wheel, and air cylinder.
d. Electric control system: electric control box, operating box,and AC frequency converters.
e. Pipe and cable system: control cable, air supply pipe, and wire sliding frame.
f. Welding system: single arc single wire: Zhouxiang ZX5-1000 submerged arc welding power, control box, and control cable. Two sets for each.
