HBYD Griptec, the 100% proofed rebar splicing solution
Griptec Rebar Coupler
Product Features
Griptec is a full performance (tension, compression, cyclic, fatigue) mechanical splice designed for the connection of concrete reinforcing bars Ø12 to 50 mm.
Designed and manufactured in compliance with Eurocode 2, BS 8110, DIN 1045, ACI 318, IBC, AASHTO, ASME Sec III Div 2.
No room for error! : Systematic QC of each and every bar end produced! A non-destructive tensile load test of the coupler-bar attachment is an integral part of the Griptec bar end preparation process.
Benefits
Griptec makes your design safer · Each and every connection is proof-tested by pull test during the extrusion cycle. · No reduction of the nominal cross section area of the bar. · Standard parallel thread are used, thus avoiding torque wrenching. · Visual-only inspection of joints is sufficient. · Cross threading of parallel threads is imposiible. · Good fatigue performance thanks to rolled threads. · Manufactured under strict quality assurance plan ISO 9001 and ASME. Third party tested. · All sleeves are individually marked allowing full traceability of material origin and manufacturing batch. · Compact design with small outer diameter.
|
The hbyd Hydraulic grip coupler system
Positive mechanical interlock
Powerful range of hydraulic presses
Splices for all bar sizes US and International
Choices for Type 1, Type 2 or higher
Black or Galvanized or Epoxy coated bars
New construction repair or retrofit
Field or shop-field installation
Sheared, flame or saw cut bars
True continuity and load path where you need it
ButtonHead System
Alleviates congestion by replacing hook bars
Same cold-swage technology as BarGrip
No special thread cutting or chemistry requirements
Head sizes of 5 times and 10 times rebar area
