Gas Cylinder Storage Cabinet
Cabinets For Gas Cylinders
Chemical Liquid Safety Storage Cabinet
1. Introduction
Put same type gas cylinder into one gas cylinder cabinet, do not mix them.
Setting the gas cylinder cabinet, put the cabinet against the wall and adjust it til its flat.
Test the alarm system once per week, usually release the gas from the the lighter nearby the intake hole, and hold few seconds, alarm system will response with sound and light alarm, otherwise it is not working, should ask the technical personnel to check and maintain. (PS: when doing the test, do not put a lot high concentrations gas directly onto the internal sensor of alarm, in case burn the sensor)
Keep the cabinet clean and often clean the dust or other contaminants on the sensor and intake vent.
2. Specification
| Item | Model | Cylinder | Dimension | Note |
| Steel cylinder storage cabinets | FSM-QCS-1 | 1 | 1800*600*450mm | 1.0mm thick CR steel plate |
| FSM-QCS-2 | 2 | 1800*900*450mm | ||
| FSM-QCS-3 | 3 | 1800*1200*450mm | ||
| FSM-QCS-4 | 4 | 1800*1500*450mm | ||
| Steel cylinder storage cabinets (alarm function) | FSM-SCS-1 | 1 | 1800*600*450mm | |
| FSM-SCS-2 | 2 | 1800*900*450mm | ||
| FSM-SCS-3 | 3 | 1800*1200*450mm | ||
| FSM-SCS-4 | 4 | 1800*1500*450mm |
 |
1. Alarm device
2. Alarm light
3. Exhaust fan
4. Sensor
5. Control panel |
