Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade
Describle:
Hydraulic shearing machine
Small order is acceptable, have a good market all over the world.
It is adopted hydraulic driving, the frame steelwelded structure which
has sufficient strength and rigidity.
The machine is equiped with a power back gauge on whicn, a manual
fine-adjusting, mechanism for blade clearance, ashadw light device
enribing cutting operatikon, a connter, a sensitive and reliable safety barrier.
It can also be equipped with a support conveyor.
Whole steel welded frame with full strength and rigidity.
Hydraulic upper transport.
Hydraulic press device with reliable safety bar.
Rapid cutting stroke adjustment is adopted, cutting frame can be adjusted
ensuring priduction efficiency increase when cutting short sheet.
Back-gauge station adopts motor-driven measure with fine manual adjustment.
Cutting counter device.
Light line device so it is easy to draw line for cutting
Contrusction:
Hydraulic top-drive, steadiness and reliability
Steel-welded construction, vibration to eliminate stress, with high strength
and good rigidity
Mechanical stop, steel torsion bar to maintain synchronization, high precision
Motorized-adjusting device of back gauge and ram's stroke, fine adjusting
by hand wheel, numerical display
Travel limit protection, full machine guarding with safety interlocker
Specification and Parameters:
No. | Name | Unit | Specification | |
1 | Max. cutting thickness | mm | 6 | |
2 | Max. cutting width | mm | 3200 | |
3 | Material strength | MPa | 450 | |
4 | Cutting angle | degree | 1.5 | |
5 | Backgauge stroke | mm | 20-600 | |
6 | Strokes | min-1 | 14 | |
7 | Housing distance | mm | 3420 | |
8 | Length of blade | mm | 3300 | |
9 | Worktable height | mm | 802 | |
10 | Axial plunger pump | Model | 25MCY14-1B | |
Flow | ml/r | 25 | ||
Pressure | MPa | 31.5 | ||
11 | Main motor | Model | Y132M-4, B5 | |
Power | kW | 7.5 | ||
Speed | r/min | 1460 | ||
12 | Backgauge motor | Model | Y80M2-6, B3 | |
Power | kW | 0.55 | ||
Speed | r/min | 970 | ||
13 | Overall dimensions | Length | mm | 3840 |
Width | mm | 1610 | ||
Height | mm | 1630 | ||
14 | Weight | kg | 6260 | |
15 | Capacity of tank (L-HL46 hydraulic oil) | kg | 257 |
Adjustment of the gap between blades:
The proper adjustment of the gap between blades is one of important factor which directly effect the cutting quanlity and the service life of the blades.So the value of the gap recommened refers to the following chart.
When adjusting the gap(refer to Fig4.2),only unscrew the clamping screw (3)then turn the handwheel to the value needed,finally clamp the screw(3) tightly.
Techncial Data:
1 |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|