Gas Indirect Fired Powder Coating Curing Oven
Many Standard Sizes • Gas or Electric Heat • Custom Designs Available
Features of Gas Powder Curing Oven
Used for curing the workpiece which has been sprayed. When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure.
Built-in track to roll your powder coating racks into the ovens could be ordered together as you required.
• Walls and roof comprised of galvanized steel plates with high-density
• Rockwool insulation at 100mm thick.
• Powerful centrifugal fans and our patented high volume internal duct system allow highly efficient running and give an even heat throughout.
• Our ovens are controlled by a PLC control panel. This allows accurate cure timing and helps improve fuel efficiency.
• High quality burners – tried and tested over many years
• Internal escape mechanism
• Flat packed for easy transportation and installation
• Each oven is built and tested before shipping. The test includes: Heat distribution check to eliminate any hot or cold spots, correct air/gas mixture to eliminate carbon monoxide gases and to ensure economical running. We also check the internal escape mechanism.
• CE mark
• Fully guaranteed
• Service contracts available
• Optional insulated floor is comprised of 10 mm thick layer of insulated fibres and a steel plate cover, which allows trolleys to be used to carry products in and out of the oven.
Technical data of Powder Curing Oven
Serial NoDefinitionParameters
| 1 | Power Supply | Gas,Italy Riello,10,0000 carl |
| 2 | Temperature Range | Indoor temperature~250℃ |
| 3 | Empty Oven Heating up Time | ≤2.0 Hours(Depends) |
| 4 | Surface Temperature Rise | ≤Indoor temperature±10℃(Except for oven door and frame) |
| 5 | Temperature Uniformity | ≤±10℃ |
| 6 | Oven body | |
| Work Size | W800*H1500*D3000 mm | |
| Door opening type | Front Back double door, container's lock | |
| 7 | Heat energy circulating system | |
| Burner | Italy Riello,10,0000 carl 1set | |
| Heating method | Indirect | |
| Pollution Discharge | pluggable | |
| Fan Impeller | Stainless steel | |
| Insulation Cotton | Heating-resisting rock wool | |
| 8 | Moving Trolley | Inside(Customized) |
| 9 | Control System | Intelligent digital PLC Wall mounting control cabinet |
