Semi Automatic Mechanical Power Presses Better Rigidity Stronge Power
Product Description:
This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and thin-sheet stretching. Besides, it can be also used for calibration and compression packing and molding of powder materials and compression molding of non-metal materials. This press series applies tow electrical control systems, that is, relay control and PLC control and three operation modes, that is, adjustment, manual and semi-automatic operation. It can realize two process modes of preset compression and preset stroke. When preset compression molding is applied, a delay and automatic back-stroking action is maintained after compression.
Product Characteristics:
It applies liquid-filling quick-action technology that doubles operation efficiency.
Three big beams apply integrated structure that guarantee the equipment quality and operation lifetime.
Two electrical control systems, that is, relay or PLC, can be selected for convenient operation of customers.
Introduction:
The Hydraulic press has three-beam and four-pole structure, which means
economical and practical. Operation space is wide, and the movable bolster
could be moved out of frame to set the die. The structure is simple and the
appliance is also beautiful. Hydraulic control adopts plug-in valve system,
which means reliable motion and long service life. The press,, which could
realize three-operation mode: adjustment, manual and semi-automatic.
The machine is applicable for metal sheet stretching and pulling, stretching,
punching, bending. It is also used for pulling, stretching and pressing
large-scale products. Presses offer fast, easy, and safe setup and operation
as well as years of trouble-free service.
Machine paramter:
| Model | Y32-100 | Y32-200 | Y32-300 | Y32-400 | |
| Nominal pressure(KN) | 100 | 2000 | 3000 | 4000 | |
| Return pressure(KN) | 180 | 250 | 250 | 510 | |
| Ejector pressure(KN) | 200 | 400 | 400 | 800 | |
| Size of table | 640X550 | 700X650 | 700X6501 | 850X850 | |
| Stroke of cylinder | 400 | 450 | 450 | 450 | |
| The stroke of the ejector | 240 | 240 | 240 | 300 | |
| Max. distance between the slider and table | 600 | 650 | 650 | 850 | |
| speed | Fast down | 180 | 180 | 180 | 200 |
|
slow down |
10-25 | 8-18 | 8-18 | 10-20 | |
|
return |
140 | 140 | 140 | 140 | |
| Motor power | 5.5 | 11 | 18.5 | 22 | |
Structure:
Equips with cartridge valve integrated unit
Adopts the independent electrical control system
Stroke and pressure can be adjusted within specified scope
Cutting dampening system (optional)
Moving Table (optional)
Light curtain safety device (optional)
Oil cooling device (optional)
Industrial touching screen monitor (optional)
Quick die clamping device (optional)
Upper ejector (optional)
Floating guide-way and rolling bracket for die exchange (optional)
Machine picture:
