MIB10-4EP-2G
Managed 4*100Base T(X) POE + 2*1000Base Combo port Industrial Ethernet Switch
Introduction
1 HENGSION Managed MIB10-4EP-2G provides 2* Gigabit Combo ports and 4*100BaseT(X) POE Ethernet ports.
2 The POE Ethernet ports fully compliant with IEEE802.3af standards, provides 15.4Watts per port.
3 Support redundant Ring protocol( recovery time20ms), with complete security and QoS policies; 4 Support VLAN division, port mirroring, and port rate limiting;
5 Support broadcast storm suppression, flow control, and centralized management and configuration by WEB,CLI,SNMP;
♦ POE Ethernet ports fully compliant with IEEE802.3af standard, provides 15.4 Watts per port.
♦ Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
♦ Support POE power configuring, monitoring, diagnosing and summary statistics.
♦ Support 802.1x authentication, VLAN, and broadcast storm suppression.
♦ 4 * 100Base T(X) POE ports + 2 Gigabit Combo ports
♦ Din rail corrugated metal casing, meet IP40 protection grade.
♦ Automatic MDI/MDI-X crossover for plug-and-play
♦ Support redundant Ring protocol( recovery time≤20ms)
♦ Loop detection and Port+ IP+MAC binding.
♦ Port traffic monitoring and fault event alarming
♦ Support WEB visual interface, support SNMP management.
♦ Support full-loaded operating temperature range -40 to 85.
♦ No fan, low power consumption design.
♦ Industrial Level-4 design.
Specification
| Technology | ||
| Standards |
IEEE 802.3,802.3u,802.3x, 802.3ab, 802.3z; IEEE802.1Q,802.1p,802.1D,802.1w,802.1s,802.1X,802.1ab IEEE802.3af |
|
| Protocols | Ring, MSTP, IGMP Snooping, GMRP,VLAN,PVLAN, Telnet, HTTP, HTTPS, RMON,SNMPv1/v2/v3,LLDP,SNTP,DHCP server,SSH,SSL,ACL,FTP,ARP,QoS | |
| Interface | ||
| Megabit Ethernet port | 10/100 Base-T(X) auto-adaptive RJ45, supports Power Over Ethernet | |
| Gigabit Fiber port | 1000Base-X SFP port | |
| Gigabit Ethernet port | 10/100 /1000 Base-T(X) auto-adaptive RJ45 | |
| Console port | RS232 in RJ45 connector with console cable | |
| Power supply for switch | 5.08 industrial terminal | |
| Power supply for POE | Power plug,100-240VAC | |
| Switching Features | ||
| Processing Type | Store & forward, wire speed switching | |
| Switching bandwidth | 19.6Gbps | |
| Packet forwarding speed | 5.6Mpps | |
| MAC Address | 8K | |
| Buffer Memory | 384KB | |
| Priority Queue | 4 | |
| VLAN number | 4K | |
| VLAN ID | 1-4096 | |
| Multicast groups | 256 | |
| Software Features | ||
| VLAN | 802.1Q,Vlan(4K), Port-based VLAN, Q-in-Q | |
| Storm Suppression | Broadcast, multicast, and unknown unicast storm suppression | |
| Flow control | IEEE802.3X negotiation, CAR function, rate limiting step 64K | |
| Multicast protocol | IGMPv1/2/3 Snooping | |
| Port Management | Support port mirroring, port isolation, port trunking | |
| DHCP Management | Support DHCP Snooping, option 82 | |
| QoS (Quality of Service) | 802.1p; Support port default priority tags, at least 4 different priority queues per port | |
| Security features | MAC address filtering, dynamic or static MAC address learning, Loop detection and Port+ IP+MAC binding | |
| Traffic Management | Port traffic monitoring and fault event alarming | |
| Management | SNMP v1/v2/v3, CLI,WEB | |
| Management Access | Support Console, Telnet | |
| System Maintenance | RMON,PDP Discovery Protocol(CDP compliant),AST | |
| File transfer | Support Log output, configuration file backup and input | |
| LED Indicator for | ||
| Power, Device running status, Ethernet port connection & running status, Fiber port connection & running status | ||
| POE Features | ||
| POE Ports | 4* 10/100Base-TX POE Ethernet ports | |
| Power supply mode | Supply power while Power Device detected | |
| Bridging mode | Endspan (V+ corresponds to 1,2; V- corresponds to 3,6 ) | |
| AF Mode | Support IEEE802.3af confirmed PD, provide up to 15.4 Watts per port. | |
| Power | ||
| Input Voltage Range | 48VDC(for POE)+12VDC(for Ethernet switch) | |
| POE Power Consumption | AF:15.4W(each port) | |
| Protection | Overload Current Protection; Redundancy protection | |
| Mechanical | ||
| Casing | Strengthened corrugated metal casing | |
| Protection grade | IP40 | |
| Dimension(L*W*H) | 154*143*58mm | |
| Installation | Din Rail | |
| Weight | 1Kg | |
| Environmental | ||
| Operating Temperature | -40+85 | |
| Storage Temperature | -45+85 | |
| Relative Humidity | 595%,non-condensing | |
| Industry Approvals | ||
| EMI | FCC Part 15,CISPR(EN55022) class A | |
|
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
About HiSupplierUser GuideFeatured Partners:
Follow Us:
Channel: madeinchina.hisupplier.com - hebei.hisupplier.com - ningbo.hisupplier.com Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español IPR Protection Policy - Terms of Use - Privacy Policy - Security Measures Copyright © HiSupplier.com Online Inc. All Rights Reserved. 
| ||
