Double Bending Beam Load Cell IP Approved For Dynamic Weighing
- Double bending beam load cell
- 4000 divisions O.I.M.L. R60 class C
- Viscous damping specially for use in dynamic weighing applications:
- Faster settling time
- Higher weighing speeds
- Increase load cell life
- Stainless-Steel housing
- Protected against humidity IP 68 (EN 60529)
- Single point load cell, for off-center loads on platforms up to 500 x 500 mm (5...35 kg) and 600 x 600 mm (50...200 kg)
- Integrated on-center overload protection, with a dual stopper for up and down loads
| SPECIFICATIONS | ||
| Nominal capacities (Ln) |
5-7.5-10 15-20-35 50-75-120-200 |
kg |
| Accuracy class | 4000 | n. OIML |
| Minimum dead load | 0 | %Ln |
| Service load | 120 | %Ln (1) |
| Safe load limit | 150 | %Ln (1) |
| Total error | < ±0.013 | %Sn (2) |
| Repeatability error | < ±0.01 | %Sn |
|
Temperature effect: on zero on sensitivity |
< ±0.01 < ±0.006 |
%Sn/5°K %Sn/5°K |
| Creep error (30 minutes) | < ±0.012 | %Sn |
| Temperature compensation | -10...+40 | °C |
| Temperature limits | -20...+70 | °C |
| Nominal sensitivity (Sn) | 2 ±10% | mV/V |
| Nominal input voltage | 10 | V |
| Maximum input voltage | 15 | V |
| Input impedance | 400 ±20 | Ω |
| Output impedance | 350 ±3 | Ω |
| No load output | < ±2 | %Sn |
| Insulation resistance | > 5000 | MΩ |
| Maximum deection (at Ln) | 0.2-0.4 | mm |
