10W 20W 30W fiber laser marking machine price / metal laser marking machine
Machine features
1. Fiber laser marking machine with high tech and it can marking on both metal and non - metal very well (but the YAG only for metal and the Co2 laser marking machine only for non - metal). Order one fiber laser marking machine means order two laser marking machines (YAG and CO2)
2. The lifetime of this fiber laser marking machine is very long (about the 50000) and the YAG
laser marking machine is about 20000 hours. The better co2 generator is only about 10000 hours.
3. This one is more easier to operate, even though the freshman can operate the machine smoothly, just like home computer, after you open, then you can use, any one can use it very well And about the YAG / co2 laser marking, the turn on process is a little complex, it need several days to learn, and operator need to be that careful kind of person.
4. The power consumption of fiber marking is very very low, it can help you to save lots of money based on long term use The YAG / co2 laser marking machine must work together with a big water chiller to cool down the laser tube, and the power consumption of the water chiller is about the 0.3$ / hour. And the power consumption of the whole machine of laser fiber machine is less 0.08$ / hour.
5. About the maintenance: the fiber laser marking machine almost never need maintenance in life.
6. The accuracy and speed of the fiber laser marking machine is more better than YAG or Co2.
The working performance is much better.
Parameter
| Model | LXF10W |
| Laser power | Fiber 10W air cooling |
| Working area | 145 * 145mm |
| Laser Wavelength | 1064nm |
| Response time | 0.5 ms |
| Frequency of pulse | 20 - 100KHz |
| Max marking depth | ≤ 0.4mm |
| Marking speed | ≤ 7000mm/s |
| Marking lines | 1 - 10 lines (in the marking area) |
| Minimum line width | 0.1mm |
| Minimum character | 0.15mm |
| Repeatability accuracy | ± 0.002mm |
| Resolution ratio | 0.1mm |
| Marking content | Text, pattern, date, bar code, etc |
| Operation system | Microsoft Windows XP or Windows 2000 |
| Control software | EZCAD control software or laser 2.1 marking control software |
| Graphic format supported | bmp, jpg, gif, tga, png, tif, ai, dxf, dst, plt, etc. |
| Unit power | ≤ 1.2KW |
| Operation temperature | 5°C - 40°C |
| Relative moisture | ≤ 90%, no fog |
| Supply Voltage | 220V / 50Hz / 10A |
