100% Heavy Duty Blue Automatic Vehicle Barrier Gate OEM Service
| Name | Bi-directional Barrier Gate | Application | Parking System |
| Speed | 3/6 second | Feature | Manual release |
| Rated Power | 80W | Certificate | CE, ISO, SGS |
| Net Weight | 60KG | Voltage | AC220V, AC110V |
Model:WST1211
Working Temperature:-40+75
Voltage:220V±10%, 110V±10%, 50/60HZ
Rated Power:80W
Relative Humidity:≤90%
Remote Control Distance:≥30m
Net Weigh:60kgs
Speed:3s,6s
Max Boom Length:6Meters
Motor Rotational Speed:1400rmp
Protection Degree:IP44
Advanced Features
|
1) The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again. |
|
2) Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring. |
| 3) Three control buttons:for boom raising, falling and pausing. |
| 4) Boom backtrack function:the boom will rise if hits something when falling. |
|
5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed. |
| 6) Both external and internal loop detectors are supported. |
| 7) "open","close" and "stop" controlling interfaces. |
| 8) RS-485 communication serial interface(optional) |
| 9) Traffic light signal connection device: red light for stop,green light for pass. |
| 10) Remote control and wire control for selection. |
Each barrier gate will include:
1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no
action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but
even when
