Economy Model Plastic Card Lamination Machine , 6000 cards per hour, 400*500mm
WL-FA5200SR-7 is an equipment of high precision and high output made up of PLC control system and mechanical hdraulic system with hot and cold system. It Is available for the laminating of all kinds of card making sheet material (especially for the non-contract IC card,ID card Including INLAY).
Feature
♦ Laminating Method:using Single Cylinder Jacks Up To Maintain Balance Automatically,Controlled With Double Pumps Cooperating With Import Pressure Module By Frequency Conversion,Multilevel Pressure,With Equality And Invariableness Pressure And High Precision
♦ Heating Method:use Heater To Heat Up And The Temperature Can Be Controlled In Many Sections,The Parameter Of Every Section Can Be Set.
♦Temperature Control Method: The PLC Work With The Temperature Control Module To Realize The Invariableness Control For The Temperature Basis The Parameter Set In Every Section.
♦ Cooling Method:cooled By Frost Water Cycle Disposed By Chiller(The Frequency Of The Stream Amount Can Be Controlled),Saving Energy And With Good Effect.
♦ Hot-Pressed Vacuum System Can Be Added As The Clients Need To Ensure The Good Laminating Effect
♦ A Attached Material Feeding Machine Can Be Added As The Clients Need To Ensure The High Material Feeding Efficiency
♦ Use Imported Aluminium Laminating Board, Alloy, The Transfer Of Heat Is More Balanced
Technical parameters:
| Model | WL-FA5200SR-7 Strengthen Laminator |
| Cooling Method |
Water cycling cooling Seven pipes for water inlet and seven pipes for water outlet |
| Heating Method | Electric heating |
| Pressure | Heating 12 stages / cooling 5 stages |
| Pressure Precision | ±0.1 Mpa |
| Temperature Precision | ±1() |
| Laminating Plate Smoothness | ±0.05mm |
| Heating Plate | Imported aluminum alloy |
| Laminating Plate Thickness | 45mm |
| Daylight Thickness | 50mm |
| Hydraulic Cylinder for Each Tower | Single |
| Laminating Plate Size | 420mm×520mm |
| Laminating Daylight | Seven |
| Voltage | 380V 60HZ/ 26KW |
| Dimension | 2300mm×630mm×1800mm |
| G.W | 2,600 KGS |
| Productivity | upto 6,000 cards/hour |
| Suitable for | RFID cards,IC/ID Contact cards, Contactless cards, Bank dual interface cards,etc. |
Guarantee life: 12 months
Machine Installation:
The on-site support for INCAPE for the proposed solution will be provided by a dedicated on-site engineer, engaged in direct and instant support activities.
Applications:
Suitable for lamination of contact and contactless plastic cards
