IP54 75 RPM Wind Turbine Generator Industry Siemens PLC Control
FD16-50 wind turbine designed by gear-less and PM direct drive, which improve efficiency of generation and stabilize system reliability.
Rated power:50kW
Intellectual mult-level protection
Full power inverter isolation
Low-noise design
Certifications:CEI 021,UL1741, IEEE1547, CSA C22.2 107.1-01, G59/2 , CE
Specifications
Model
| FD16-50 | |
| Design class | IECII |
| Orientation | Upwind |
| Design life | 20 years |
| Rotor diameter | 15.6 m(51ft) |
| Hub height | 20.6m(67ft) |
| Tower type | Monopole |
| Certifications | CEI 021,UL1741, IEEE1547, CSA C22.2 107.1-01, G59/2 , CE |
| Performance | |
| Rated power | 50kW |
| Power regulation | -- |
| Rated rotation speed | 75 RPM |
| Cut-in wind Speed | 3m/s |
| Rated wind speed | 13m/s |
| Cut-out wind Speed | 20m/s |
| Survival wind Speed | 52.5 m/s |
| Weight | |
| Blades | 210 kg |
| Nacelle& Generator | 3,000 kg |
| Tower | 6000kg |
| Brake system | |
| Air Brake | -- |
| Mechanical brake | Air driven caliper |
| Electrical brake | Dump load |
| Yaw system | |
| Control | Driven by electric motor and actively trace wind direction and automatic untwist cable |
| Control /Inverter System | |
| Control type | Industry Siemens PLC |
| Inverter type | Full power Inverter with isolation transformer |
| Grid interface | AC400V50Hz,AC480V60Hz |
| Monitoring System | cube2.0 |
| Generator | |
| Generator type | 3 Phase, Permanent Magnet Generator |
| Gearbox | No gearbox – Direct Drive |
| Rated Voltage | 400VAC |
| Isolation class | F |
| Blades | |
| Material | FRP |
| Blade length | 7.5 |
| Quantity | 3 |
| Tower | |
| Tower Type | Monopole with internal ladder |
| Surface treatment | Anti-rust painting |
| Height | 20m(65ft)/30m (98ft) |
| Noise | |
| Noise level | Less than 56dBA |
| Environmental specification | |
| Operational temperature | -20 to 50 |
| Generator | IP54 |
| Lightening protection | Receptors installed in the blades, nacelle lighting rod and electrical surge protection |
