840mm / 1130mm PVC Corrugated Roll Roofing Sheet Extrusion Machine 0.8 - 3mm For Factory Use
Quick Detail:
The pvc roofing sheet forming machine is mechanotronics, with the advantages of:
1. Good performance
2. High quality
3. Reasonable and compact
| Extruder | SJ50/30 +SJZS80/156 |
| Mold width | 1300mm |
| Shaping width | 800*1300mm |
| Haul off roller quantity | one pair the upper and lower part |
| Cutting mode | Pneumatic cutting |
| Max output | 350kg/h |
| Drive motor | 55kw+15kw |
| Machine weight | 22000kg |
| Machine Size | 17*2.5*2.2m |
| specification of the roof sheet(Can be customized according to design) | |
| Width | 840/1130mm |
| shape | Round/trapezoidal |
| thickness | 0.8~3mm |
Description:
The pvc roofing sheet forming machine by following parts:
1, Extruder,
2, Extrusion mould,
3, Calibration system,
4, Haul-off machine,
5, Cutter and stacker.
Applications:
The pvc roofing sheet machine is mainly used in the production of plastic roofing tile,which is widely used in:
Roofing for workshop, warehouse, market;
Roofing for parking lot, corridor, passage, balcony;
Clapboard of the road and etc.
Competitive Advantage:
The roof panel machine consists of conical twin screw extruder, hanger-style flat die, size forming mould, high-efficiency vacuum pump, hauling-off unit, pneumatic cutter and other auxiliary equipment.
Machine list:
| No. | Machine | Qty. | |
| 1 | Screw loader for extruder | 1set |
Main tile extrusion line |
| 2 | Conical twin-screw extruder(PVC) | 1set | |
| 3 | Vacuum loader and drying hopper | 1set | |
| 4 | Single screw extruder(ASA) | 1set | |
| 5 | Extrusion mould and distributor | 1set | |
| 6 | Calibration mould and trimming device | 1set | |
| 7 | Haul off unit | 1set | |
| 8 | Cutter | 1set | |
| 9 | Stacker | 1set | |
| 10 | Ridge tile Oven | 1set | |
| 11 | Ridge tile Forming machine and mould | 1set | |
| 12 | Screw loader for Mixer | 1set | Auxiliary equipment |
| 13 | Mixer unit | 1set | |
| 14 | Crusher | 1set | |
| 15 | Pulverizer | 1set |
Work flow:
Mixer for bottom layer(PVC powder, CaCO3, CPE, PE-WAX, Stearic acid , Compound stabilizer ,ACR, paraffin)
Extrusion process: Conical twin-screw extruder for bottom layer-Single screw extruder for Surface layer(ASA)-Mould-surface embossing(Optional)-Forming machine-Haul-off-cutter-stacker –Main tile
Oven-Ridge tile machine and mould-1set Ridge tile
Crusher(waste material)-Pulverizer—Reuse again for extrusion line
Product installation method:
Metal supporting
Tool: screw,presser,Pressing cap,rubber ring,gasket
