PVC Imitation Marble Profile Extrusion Machines Artificial Marble Machine For TV Backdrop Sideline
1. Product advantage:
Cost:1/10 compare with nature marble.
Eco-friendly product: no poison, no radiation, no pollution to environment and 100% recyclable.
Life time: more than 15 years.
Advantage: it has the advantage of water proofing, fire proofing, isolation, gorgeous and shining
2. Product application:
Wall waist, Door line, foot line, TV backdrop sideline income etc, is the best choice of the hotel, shopping malls, villa, household and public occasions.
3. Product cost and selling price:
| Material | PVC powder, Calcium Carbonate, Stablizer, Lubrication ,paraffin |
| Material Cost | USD 350/ 1000kg |
| UV Film cost | USD 0.6/ square meter |
| Profit | sell as meter |
4. Detailed instruction:
4.1. Raw material & Final product:
| Raw material & formulation | PVC powder, Calcium Carbonate, Stablizer, Lubrication ,paraffin |
| Description final product & Output |
PVC Marble Profile Making Machine ; Width:30-300mm Output:230-300kg/h(Depending on CaCO3 proportion) |
4.2. Work condition (Provide by customer)
| Warehouse/Workshop |
Machine Dimension (M*M*M): 35(Length)×2(width) ×3.5 (Height) Crane: Machine positioning |
| Temperature & Humidity | ≤40, ≤95% |
| Power supply | 3-phase, 380 V, 50 Hz(or customized) |
| Wire/cables: | Wires/cables from power supply to control cabinet of this production line; |
| Cooling Water hose/pipe: | Water supply to machines and pools |
| Lubrication oil: | Sinopec, Exxon mobile |
| Compressor | necessary |
4.3. Energy consumption
| Installation power |
Total 100KW,Actual consumption about 75% Suggested 150KVA transformer Needing at least 100KVA transformer |
| Cooling Water | ≤20, ≥0.3Mpa, 5-6tons/hr |
| Compressed air | 0.3m3/min, 0.6Mpa |
| Manpower | 3 Persons/shift |
4.4. Machine list:
| No. | Machine | Qty. | Remark |
| 1 | Screw loader | 1 set | Extrusion line |
| 2 | Conical twin-screw extruder(PVC powder) | 1 set | |
| 3 | Single screw extruder(PVC granule) | 1set | |
| 4 | Calibration table | 1 set | |
| 5 | Haul-off unit | 1 set | |
| 6 | Cutter | 1 set | |
| 7 | stacker | 1 set | |
| 8 | RYM Hot stamping machine | 1 set | Film for Surface |
4.5. Work flow:
Mixer for bottom layer(PVC powder, Calcium Carbonate, Stablizer, Lubrication ,paraffin)
Extrusion process: Conical twin-screw extruder for Bottom layer PVC –Single screw extruder for Co-extrusion layer PVC-Mould-Calibration table-Product surface Hot stamping by film- Haul-off-cutter-stacker –Profile product
Crusher(waste material)-Pulverizer—Reuse again for extrusion line
4.6. Product installation method:
Glass glue
