contact: claire_luan[at]ginde.com
ginde designs the manifold according to the international technical requirement of underfloor heating. Ginde's manifold has passed the test of hydraulic pressure between 0.8-1.0Mpa.
well-distributed: guarantee the even pressure on each outlet and stable volume flow. Avoid the mutual interference in outlets.
avoid leakage: scientific structure, taper thread with double sealing.
water saving: each of the outlet joint connects with one sanitary ware, overlapping the volume flow, decreasing the caliber of the pipe, laying it down easily, and reducing loses of the cocks. One manifold replace three tees, smoothing the installation and reducing the cost of decoration.
logical grades of applying the underfloor heating can meet the requirement of human health.
Application:
Insdustrial and civilian construction, hotel, airport, stations, home decoration, hot and cold water supply system, drinkable water supply system, pharmacy, foodstuff, beverage and hygienic industrial fluid distribution system.
Installation
the place of manifold should consider following aspects: convenient operation. Debugging test, space saving.
screw the manifold on the upper side-panel, while fix the Siamese below it.
before set the plug of the manifold, please twining some Teflon tape around the thread. Screw in the plug until you feel the resistance. There is no necessary to set the plug into the manifold. The main pipe will be cleaved due to expansion of the plug by screwing strongly.