Applications:
The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
* Specially for the thickness measurement of coating on small workpiece.
* Measuring methods: eddy current (N).
* Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use "USB data output" and "RS-232 data output" to connect with PC.
* Provide "Bluetooth data output" choice.
* Separate Type, measurements can be more flexibility.
Operating Principle Eddy Current (NF)
Measuring Range 0~200 um / 0~8 mil
Resolution 0.1 um
Min. Radius Workpiece convex 2 mm / concave 4 mm
Min. Measuring Area 2 mm
Min. Sample Thickness 0.1 mm
Accuracy ± 1~3%n or ± 2.5 um
Auto Power Off
Metric / Imperial Convertible
Battery Indicator Low Battery Indicator
Operating Conditions Temp. 0~40 °C, Humidity: 10~90 %RH
Power Supply 4 x 1.5 V AAA (UM-4) Battery
Dimensions 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch )
Weight 215 g (Not Including Batteries)
Standard Accessories:
1. Main Unit
2. Probe (NF Type)
3. Calibration Base Set (NF Type) CTG-BS
4. Calibration Foils CTG-CF (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
Optional accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software
