Outdoor 24-27kV Dropout Fuse Cutout 100A 200A Grey Porcelain
1. Dropout action is assured. The link provides sufficient surface area to facilitate re-fusing by a linesman wearing gloves.
2. Fuse TubeThe inside diameter of the fuse tube increases the internal pressure, giving superior and reliable expulsion action.
3. During frequently encountered intermediate fault ranges, this diameter also permits higher TRV, (Transient Recovery Voltage), values to be tolerated.
4. The liner is constructed of an arc quenching material.
5. The tube is manufactured from fiberglass, which permits a smaller bore and provides higher burst strength.
6. It is protected from the weather and environment by an ultra violet resistant coating.
Specifications:
| Type | Rated Current (A) | Rated Voltage (Kv) | Impulse Voltage (kV) | Breaking Current (A) | Dimension (cm) | Creepage Distance (mm) | Weight (kg) | Power-frequeny withsand voltage (kV) |
|
YXC3-24/100
|
100
|
24-27
|
150
|
8000
|
50*38.5*15.5 |
540
|
9.2
|
65
|
|
YXC3-24/200
|
200
|
24-27
|
150 |
10000
|
50*38.5*15.5
|
540
|
9.6
|
65
|
Service Conditions:
1. Relative humidity: daily average value not more than 95%, on average less than 90%
2. The location of on more than 1000m altitude ( high altitude type not more than 3000m )
3. Installation site should be no fire and explosion danger, chemical corrosion and violent cibration.
4. wind speed not more than 34m/s
5. Ice cover thickness not more than 20mm
6. Environment temperature: -40oC ~ +40oC
What we manufacture:
1. High-Voltage Electrics: Composite Insulator, Lightning Arrester, Dropout Fuse Cutout,
Disconnecting Swich
2. Overhead Power Line Fittings: Suspension Clamps, Strain Clamps, Link Fitting, Splicing Fitting,
Protective Fitting
3. Aerial Insulation Conductor Fitting: Cable Fitting
4. Distribution Equipment Fitting: Connecting Fittings, Substation Fitting
5. Cable Accessories
