Large diameter workpiece rotor end ring braze welding equipment
Specification:
Models and technical parameters for reference:
|
Model |
Rated power (KW) |
Rated frequency (KHZ)
|
Max. diameter (mm)
|
Max. thickness ( mm )
|
Welding time ( min ) |
Heating temperature ( ) |
Cooling water flow (T/h) |
| MFSC-100 | 100 | 5-15 | 350 | 10-40 | ≤4 | 850 | 1.5-2 |
| MFSC-160 | 160 | 6-10 | 550 | 10-80 | ≤4 | 850 | 1.7-2.3 |
| MFSC-250 | 250 | 6-10 | 750 | 10-100 | ≤6 | 850 | 3-5 |
| MFSC-300 | 300 | 4-10 | 900 | 10-100 | ≤8 | 850 | 4-6 |
| MFSC-400 | 400 | 3-10 | 1050 | 10-120 | ≤12 | 850 | 5-7 |
| MFSC-500 | 500 | 3-10 | 1200 | 10-150 | ≤12 | 850 | 8-10 |
| MFSC-600 | 600 | 3-10 | 1500 | 10-200 | ≤12 | 850 | 10-12 |
The equipment takes advantage of induction heating which is of quick heating, little burning loss and high labor strength.
Description:
This set of equipment is used in large and medium generator stator or electric generator coil and electrode induction heating brazing. The heating power adopts advanced high speed IGBT transistor frequency conversion device which convert 50Hz three-phase power frequency energy to single high and medium frequency power. This equipment follow the principle of electromagnetic induction, under the circumstance of air, vacuum and protective gas, the device puts the workpiece in alternating magnetic field,and heat can be created because of eddy-current loss, to meet the need of smelting, heating and quenching.
This equipment is of strong technology with high degree of automatic, easy operation, good quality of workpiece welding.
The middle frequency power supply adopts touch screen to replace tranditional switch and button. The cabinet is tidy and compact.
Proper choice on welding material and brazing flux, which makes the welding quality better.
The infrared thermometer control system non-contact measurement on work-piece. And the control on the middle frequency power supply for the output power adjustment, thus making the temperature on the work-piece constant. The temperature control precision of the welding work-piece can be ± 2%.
The output power of the power supply does not vary when the induction coils and work-pieces change.
All-digital control system, no relay control.
The technology is divided into 2 kinds: overall braze welding and segment braze welding according to the diameter of the motor. If the motor's diameter is below 900mm, the overall braze welding is selected. Otherwise, the segment braze welding is selected.
Competetive advantage:
The braze welding device adopts proper transistor tube induction heating power supply, high heating efficiency, good welding quality.
The welding is suitable for whole braze welding and segment welding which can meet the requirement of silver-based and copper-based braze welding material.
The welding strength and electricity conductivity all meet the requirement of technology.
Various running pattern of the middle frequency power supply: constant output current running, constant power running, temperature closed loop running.
Complete protection function on over-voltage, over-current, phase loss, low voltage, low pressure of cooling water, over-high temperature of cooling water etc.
Full digital control system for precise and real-time monitor and control.
The power supply has following functions: automatic sweep frequency, constant power output, automatic fault display, record and storage of technology data. All these functions can ensure the workpiece is in constant power when it is welded.
Global leading welding procedure is adopted to solve many problems regarding the welding for the users.
This heating method has many advantages such as fast heating rate, less burning, low labor intensity and good quality. It can save 35% energy than old type valve high frequency power and 20% than controllable medium frequency power. It also has no noise. This product has an irreplaceable position on mechanical component welding and heat treatment industry with its superior performance.
World-leading welding technology support can decrease many users’ welding problems.
Engineers are available abroad for installation, debugging, maintenance as well as training.
Detailed image:
