Electronic Components Fiber Laser Engraving Machine Circuit Board PBC Board Transformer
Brief introduction:
The machine is used in metal and nonmetal materials, stainless steeel, aluminum, high hardness alloy steel, ABS, etc.
Laser engraving machine technical parameters
Model
|
10/20/30/50W |
Laser device
|
Gernmany IPG fiber laser device, Lifetime >100,000 hours |
Optical maser wavelength
|
1064nm |
Average output power
|
10W / 20W / 30W |
Beam Radiation Angle
|
≤2mrad |
Modulation frequency range
|
20KHz~80KHz |
Beam Quality
|
M2:1.2-1.8 |
Working Environment
|
Clean and dust free or dust less |
Marking Depth
|
0-1mm(depending on the materials) |
Maximum speed
|
8000mm/s |
Resolution
|
0.001mm |
Repeat location accuracy
|
0.003mm |
Marking range
|
F=160mm,160×160mm |
Working range
|
182mm x (±2mm) |
Working stability (8h)
|
<±1%rms |
Minimum line width
|
30um |
Minimum character height
|
0.2mm |
Sheet label marking time
|
≤ 90 s (depend on the content) |
Laser power supply
|
<500W / 220V / 50Hz, |
Cooling mode
|
Air cooled |
The Max input power
|
2 phase 220V AC,50Hz,about 2.5A |
Environmental Requirement
|
0~35°C,humidity≤90% |
Graphic Format Supported
|
bmp,jpg,gif,tga,ai,dxf,dst,plt,etc. |
Warranty
|
2 year, within time free change parts |
Package
|
Wooden case |
Delivery time
|
5 working days |
Packing size
|
1000*1200*1600mm |
G.W
|
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|