Heat treatment 10MM 6061 Alloy aluminum sheet
Product Details
6061 Aluminum plate is the most commonly specified Aluminum for general purpose applications. Silicon and Magnsium are the major alloying element of this heat treatable plate. Commonly used in structural applications it has good formability, weldability, and corrosion resistance, and although it might not machine as good as 2024 and 7075, it certainly is used in many machined part applications that don't require the higher strenght levels that you get from 7075 and 2024. We stock 6061 Aluminum plate in thicknesses from .250" to 10.00".
Aluminum Sheet | |||||
Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper | |
A1050,A1060, A1070,A1100 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18, H24,H26,etc | |
3A21,A3003,A3105,A3004 | 0.2-100 | 20-2200 | 20-8000 | O,H14,H18,H24,etc | |
A5052 ,A5005,A5083,A5754 | 0.2-100 | 20-2200 | 20-8000 | O,H18,H24,H32,H34,H111,H112 ,etc | |
A6061,A6082,A6063 | 0.2-200 | 20-2200 | 20-8000 | T4,T6, T651,etc | |
A8011 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18,H24,H26, etc | |
Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP, 1X20GP can load about 18MT | |||||
Standards:ASTM-B209. EN573-1, GB/T3880.1-2006 | |||||
Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set | |||||
Application : Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect | |||||
MOQ | 2.5 tons | ||||
Payment term: | T/T,L/C | ||||
Delivery Time | 15 days after 30% T/T payment or receiving L/C copy | ||||
Kind attention : Specifications can be customized as the customer’s requirements. |
Technical Data
Tensile Strength (PSI) | 45,000 |
Yield Strength (PSI) | 40,000 |
Shear Strength (PSI) | 31,000 |
Elongation in 2" | 12 |
Brinell Hardness | 95 |
Cut Tolerance | +/- 1/4 in |
Dimensions | 12 in × 12 in |
Form | Sheet |
Material | Aluminum |
Picture