Custom Waterborne Spray Booth PU Heat Preservation Belt Drive For Body Shop
Features
1. With water-borne paint system on the both sides of ceiling,speed up drying after painting
2. 0476mm color steel with polyurethane inside for wall panel.
3. Quality brand name double-intake centrifugal fans,belt drive type
4. Riello RG5S diesel burner with a heating productivity of 260000Kcal/h
5. Pneumatic damper for spraying to baking cycle.
6. All panels are tongue and groove interlock structure
7. Industry-leading light levels
8. Spray booth specific, dual voltage 58-watt light fixtures
9. Booths include installation instructions, fan, motor & drive, fasteners, hardware, and sealant necessary for assembly
10. Control panel and other electric components can be purchased separately
Advantage
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. In the meantime, Water-Borne Paint System start working,high speed air flow comes out from nozzles,speed up drying. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.
| Item | Detailed Specification |
| Inside dimension | 6900×3900×2650 mm (L×W×H) |
| Outside dimension | 7000×5600×3500mm (L×W×H) |
| Front door | Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
| Emergency door | 1 units, 800×2000mm (W×H), colour: white. |
| Basement | Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour. |
| Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with PU inside, colour: white. |
| Light | Ceiling Lights: 8Units×4Pcs=32Pcs×58W, side lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated, illumination ≥1500LUX |
| Generator cabinet | Intake from side upper, exhaust from rear upper, aluminum alloy steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
| Intake and Exhaust system | Inlet: 2×4KW centrifugal fan, belt drive, model: TAE-400H, total air capacity: 25000m3/h, air speed ≥0.24m/s. |
| Outlet: 1×7.5KW centrifugal fan, belt drive, model: TAE-560H, total air capacity: 24000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend. | |
| Heating system | Italy RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, max temperature: 80. |
| Purification system | Pre-filter, ceiling filter, fibreglass filter, cylinder activated carbon filter. |
| Water base paint system | Water base paint system on the roof, stainless steel nozzle, 3×0.75KW motor, air capacity: 4800 m3/h. |
| Roof | 50mm PU panel. |
| Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, pressure gauge, power supply switch, water base paint switch, emergency stop, all motors is normal start. |
| Total power | 22KW (Power supply 1×220V, 3×380V, 50HZ) |
