Rubber tracks conversion system for trucks
Specification:
CNC Machined Billet Aluminum
Full bearing setup
All terrain rubber track conversion system
Adjustable track tension
Larger drive wheel for more speed
Double arms for more realistic setup
Better scale design
Engineered by RC4WD UK
Manufactured by RC4WD
Hex:12mm
Notes:
This is enough to prep one axle. In order to do a 2 axle truck, you will need two of this item.
These require a fitting kit to be used for proper mounting and use.
With
only one pair installed on a truck, you will have a gearing change
between the normal wheels and the Tracks. If mounting the tracks on the
front it will cause push / under steer.
We recommend the use of these tracks on all corners of the truck for best results.
Brushless system and higher gearing is suggested, but not required.
Threadlock is requires on all screws on the tracks before use.
Capable
Greatly improved traction
Exceptional floatation with very low ground pressure
Matches or exceeds wheeled hauling capability
Maximum performance when pulling implements
Exclusive technologies for superior performance
Reliable
Outstanding durability
Ten years of ATV track system innovation, engineering, and marketing
Half-century heritage of molded track manufacturing
Warranty coverage
Versatile
Systems for virtually all 4WD ATVs 300cc and up including side-by-sides and 6-wheelers.
Safe
Greater vehicle stability
Remarkable operational control
Easy
Easy switch from wheels to track systems
Easy maintenance
Model: | H5H-255 | Length: | 980mm |
Packing: | Simple/cardboard box/iron frame | Width: | 255mm |
Height: | 630mm | ||
Material: | Alufer /rubber/ macromolecule | Net Weight: | 33KG |
Ground Contact Length: | 700mm | Load bearing: | 1T |
Sprocket Center Distance to the Ground: | 490mm | ||
