3 Phase Plasma Cutter / AC 380V Hand Held Plasma Cutter Connect In DKJ-200
Air plasma cutting machine is a new type of thermal cutting equipment,and its working principle is a based on compressed air as working gas,to high-temperature high-speed airflow would blow off melted metal,forming a narrow kerf.The device can be used for stainless steel,aluminum, copper,cast iron,carbon steel and other metal cutting,not only thecutting speed,kerf,narrow incision formation,heat-affected zone is small,but also the workpiese is not easy to get deformed, it’s of simple operation,and also has significant energu-saving effect.The device is applicable to all kindsof machinery,metal structuring,installation and maintenance,for medium,thin sheetcutting,drilling,wabu,open groove cutting,ect.
| Material | Plate Sickness | Air Pressure | Applicable Model |
| carbon steel alloy-steel stainless steel | 0.8-15.0 | 3.0-4.0 | CUT40D |
| 0.8-25.0 | 3.0-4.0 | CUT60CG | |
| 0.8-40.0 | 3.0-5.0 | CUT100I | |
| 0.8-60.0 | 3.0-5.0 | CUT160I |
| Technical Parameter | |||||
| Input Voltage (V) | Frequency (HZ) | Rate Input Current (A) | Output Current Range (A) | No load voltage (V) | Duty Cycle (%) |
| 3 phase AC380V+15% | 50/60 | 12 | 20-60 | 240 | 60 |
| No Load Loss (W) | Power Factor | Insulation Grade | Housing Protection Grade | Net Weight (kg) | Dimension (mm) |
| 80 | 0.93 | F | IP21 | 15.7 | 480*260*360 |
| Standard Fittings | |||||
| Cutting Torch | Earth Clamp | Gas Hose | Quick Connect | ||
| SG55+5m+5mm2 | 300A+2.5m+10mm2 | 3m | DKJ-200 | ||
CUT60 Picture
