Light Emitting Diode Side View LED Size 3.8x0.6x1.2mm 020 White Right Angle
TOP 020 Side View LED
Features:
- White SMT package.
- Side view white LED.
- Wide viewing angle.
- Lead frame package with individual 2 pins.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- Due to the package design, the 020 SMD LED has wide viewing angle, low power consumption and white LEDs are devices which are materialized by combing blue LEDs and special phosphors. This feature makes the LED ideal for light guide application.
- The 020 SMD LEDs much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence the mixture of blue light and yellow light results in white emission.
- Utilizing advanced InGaN chip technology.
- Besides, lightweight makes them ideal for miniature applications, etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- Indoor signboard use.
- LCD Back Light.
- Indicators.
- Illuminations.
- Mobile phones.
- General use.
Part No. | Chip Material | Lens Color | Source Color |
DL-TOP020SR-1SR120 | AlGaInP | Water Clear | Hyper Red |
- Absolute Maximum Ratings at Ta=25
Parameters | Symbol | Max. | Unit |
Power Dissipation | PD | 60 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
Continuous Forward Current | IF | 25 | mA |
Reverse Voltage | VR | 5 | V |
Operating Temperature Range | Topr | -40 to +80 | |
Storage Temperature Range | Tstg | -40 to +100 | |
Soldering Temperature | Tsld | 260 for 5 Seconds |
Electrical Optical Characteristics at Ta=25
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Luminous Intensity * | IV | 400 | 600 | --- | mcd | IF=20mA (Note 1) |
Viewing Angle * | 2θ1/2 | --- | 120 | --- | Deg | IF=20mA (Note 2) |
Peak Emission Wavelength | λp | --- | 632 | --- | nm | IF=20mA |
Dominant Wavelength | λd | --- | 624 | --- | nm | IF=20mA (Note 3) |
Spectral Line Half-Width | λ | --- | 20 | --- | nm | IF=20mA |
Forward Voltage | VF | 1.80 | 2.20 | 2.80 | V | IF=20mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Package Dimension:
Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)
CIE Chromaticity Diagram:
hromaticity Coordinates Specifications for Bin Rank:
BIN Code | X | Y |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|