Convenient Fiber Optic Sheet Metal Laser Cutting Machine 2000W High Speed precision
Overview
FL2000F-1530 Fiber Optic Sheet Metal Laser Cutting Machine has equiped with a a big sealed working house, which can protect the worker during cutting operation. The laser power is very high, reaching 2000W, which can cut very thick metal sheet.
The laser cutter consists of 5 parts ,the machine bed host, electrical control, water cooling unit, air cooling system and Exhaust system.
First, the machine bed host is the main part of the whole laser cutting machine. Cutting function and cutting accuracy of laser cutting machine are realized by it.
Second, the electrical control system is an important part of ensuring that all kinds of graphics running tracks, which is composed of the CNC and the low-voltage electric system.
Other auxiliary peripheral equipment including large water chiller, cooling system, exhaust system and power supply
Advantages
1. Great Performance: Identical cutting quality on any cutting point is realized through fiber transmission.
2. High Efficiency: The rapid cutting speed is two times higher than that of CO2 laser machine.Its use-cost is low.
3. Low Consumption of Gas: Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4. Low Consumption of Energy: It is environment-protecting and energy-saving.Its power consumption is reduced by 20%-30% compared with that of CO2 laser machine.
5. Maintenance-free: Reflecting lens is not needed for fiber transmission.Much time is saved when optical path is adjusted.It is maintenance-free
6. Install Proportional Valve: Use software to change the air and control the air pressure automatically, no need to change the air manually, it can save you much time;
7. Stable working table: Use 8mm thick steel side board, around 3.5 tons in weight;
8. Dual drive, aging treatment, stress relief test to ensure long time fast running without changing shape;
Parameters
| Laser output power | 1000W/2000W/3000W |
| Laser wavelength | 1070 nm |
| Laser type | Fiber laser souce |
| Max cutting speed | 18m/min |
| Max cutting thickness | 0-18mm according to material |
| Output energy regulating | 10%~100% |
| Input electric power for laser | ≤2KW |
| Type of cooling | Water cooling |
| Drive mode | Imported servo motor |
| Transmission mode | Imported high precision Rack and Pinion |
| Working temperature | 5-45 degrees |
| Continous working time | 24 hours |
| Max-range for cutting | 3000mm×1500 mm/ 2500x1300mm |
| Power supply | 380V/50HZ |
| Service | Oversea service for installation and training |
Cutting parameter
| 300W | 500W | 750W | 1000W | 2000W | |
| Carbon steel | 0-3mm | 0-6mm | 0-8mm | 0-10mm | 0-18mm |
| Stainless steel | 0-2mm | 0-3mm | 0-4mm | 0-5mm | 0-8mm |
| Aluminum alloy | 0-2mm | 0-3mm | 0-4mm |
Application
It has been widely used in the field of aviation and space, weapon, warship, petrifaction, medical, instrument, micro-electron, auto mobile car and so on.
Samples
Machine outlook
