High Tech Horizontal Textile Finishing Machinery 150 m/min For Knitting Fabric
Oil circulating heating
Circulating hot oil temperature control:Large heat exchange area can rapid heating
Direct gos heating
Direct gas heating system:Burner placed outside the box body is easy to maintain and ensure the sufficient supply of fresh air
Type of heating:
- Direct gas heating
- Circle oil heating
- Steam heating
- Electric and steam heating
Constituent part:
| No. | Name | Note |
| 1 | High-tech stenter chains | |
| 2 | Infeed combinations | Woven/knitted fabrics |
| 3 | Padder | |
| 4 | Stenter infeeg section | |
| 5 | Fabric preparation | |
| 6 | Selvedge uncurlers | |
| 7 | Chamber configuration | |
| 8 | Air circulation control | |
| 9 | Oil circulating heating | |
| 10 | Direct gos heating |
High-tech stenter chains
High-tech horizontally return chain
- Roller chain which runs dry through the machine with fully encapsulated ball bearing and long-life lubrication for years(depending upon the process)
- For running speeds well in excess of 150m/min
- Design as pin chain,clip chain or combined clip/pin chain
- Optionally depinning protection is possible for pin chain execution:locking clamp or protection bar.
Infeed combinations
Huayang offers standard infeed combinations. these are designed to match the requirements of most kinds of fabric treatment process. The illustrations here show three infeed combinations.
Padder
Padder Matex6000 standard two bowl pad mangle.suitable for finishing and dehydration process. One squeeze roller is a cylindrical and solid core roller.The other is designed as a solid core pressure roller with a crown to apply uniform pressure.
On padders with automatic quick cleaning ,the trough is supplied with a system for quick draining and quick cleaning.
Stenter infeed section
Short controlled fabric guidance for optimum feeding of even extremely delicate knitted fabrics. Uniformed pinning by two driven draw rollers in the infeed unit.
Infeed track lengths:Up to 6m to take auxiliary equipment;e.g.,selvedge gumming device,steaming unit etc.
Fabric preparation
- Large overfeed pinning adjustment range(-10% to +60%)to accommodate the various amounts of shrinkage encountered in different fabrics.
- The selvedge tension can be set separately for the left-hand and right-hand sides control.
Fabric run:overfeed during fabric pinning
Fabric run:clip operation
Selvedge uncurlers"
- Mechanical spreading unit
- Pneumatic uncurling unit,specially for elastics(single jersey cotton)
- Mechanical scroll spindles ,either two ,three or four on each side
Chamber configuration:
Basic structure
- Modular design , can adapt to the changes of different functional requirements
- Easy to assemble
- The structure of the space savings
- Only 1651 mm high
Mechanical and electrical equipment
- All groups of drive components placed outside the hot oven , easy to maintain
- No lubrication points in the oven
- All drive motors does not need to maintain
Energy management
- 150 mm insulation door is made of high-density insulation materials, making the oven heat radiation low
- The joint and opening of oven both have effective seals
- With Airflow shielding device at the entrance and the exit
Air circulation control
Air circulation
- Operation setting:The ratio of gas flow rate can be set for any need
- Advantages: The stability of the fabric is available at any time,and speed fan can accurately set parameters , even at low speeds. it’s suitable for the process of sensitive fabrics such as knitted fabric , coated fabric , reengineering fabric , superfine fiber fabric , plush fabric and silk
The inverter control system of circulating air
- Gas flow is controlled by frequency converter
- You can choose the machine whose aeromatic system is suitable for circulation of hot oil heating. It's role is to stop the draught fan to prevent overheating damaging fabric or leaving traces
- You can choose the machine,whose bypass system is suitable for the heating of gas.
