Skin Care V-line 3D Cog PDO Thread Lift Cannula

How to apply thread
 
1. Determine the number of thread and treatment area on the face. 
2. Inject the Anesthetic on the treatment area.
3. Make punching with needle, insert the cannula and then pilfer the inner part of cannula. 
4. Pull the thread out from the needle and Insert the thread(by taking direction the part of thread to be inserted first into the skin) into the cannula which is put on the face. *(Use a cannula to make tunnel for the thread and insert the thread)
5. Pull out the inserted cannula after treatment done, as holding the end of Cog thread inserted into the face.
6. Press the treatment area in order to get well the thread stuck in the skin.
7. Make Sure thread does not come out from the skin and then, Cut off the remaining part of thread as holding tighten the thread of outside of skin
8. Press slightly up and down around the punctured skin.
 Advantage
Safe
No special preparation before treatment
Instant effects
High efficiency
No cuts or scars
Completely absorbable
Possible to repeat procedure
Threads are not visible or felt
 
 
Characteristics of Thread Lifting
1. Use a specifically formulated thread made of biodegradable protein
2. Provides less pressure by using a very thin and narrow thread
3. Can perform a total face lift
4. A short procedure, taking about 50 minutes including before and after care
5. Possible to wash after the next day of the procedure due to the absence of scarrin